A3A20
A3B00
A5B57
A7A20-1
A7A20-2
A7A21
A5A21
AX5A22
A5B51
AX5B51
AX7A20
AX7B96
A9B57-1
A9B57-2
S5A20
S5B00
Specification
| Model | A3A20MG8E | A3A20CG8E | A3A20MU24E | A3A20CU24E |
| Interface | GigE / PoE | USB3.0 | ||
| Mono/Color | Mono | Color | Mono | Color |
| Resolution | 12MP（4000x3000） | |||
| Image Sensor | CMOS/ IMX226 | |||
| Sensor Size | 1/1.7" | |||
| Pixel Size | 1.85x1.85（μm） | |||
| Shutter | Rolling | |||
| SNR | >38dB | |||
| Dynamic Range | 66dB | |||
| Frame Rate | 9 fps | 24 fps | ||
| Bit Depth | 12 | 10 | ||
| Image Format | Mono8/10/10Packed /12/12Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
| Binning | Support | - | Support | - |
| Gain | x1～x32 | |||
| Gamma | Range from 0 to 4, support LUT | |||
| Exposure Time | 143μs～15s | 55μs～15s | ||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
| Image Buffer | 64MB | |||
| User Setting | Support two sets of user-defined configurations | |||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
| Weigth | 88g | 68g | ||
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
| Power Consumption | 12V≈3.4W | 2.4W | ||
| Lens Mount | C | |||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | |||
Specification
| Model | A3B00MG000E | A3B00CG000E | A3B00MU000E | A3B00CU000E |
| Interface | GigE / PoE | USB3.0 | ||
| Mono/Color | Mono | Color | Mono | Color |
| Resolution | 20MP（5472x3648） | |||
| Image Sensor | CMOS/ IMX183 | |||
| Sensor Size | 1" | |||
| Pixel Size | 2.4x2.4 （μm） | |||
| Shutter | Rolling | |||
| SNR | >38dB | |||
| Dynamic Range | 66dB | |||
| Frame Rate | 5.8fps | 19.66 fps | ||
| Bit Depth | 10 | |||
| Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8/10/10Packed, BayerGB8/10/10Packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
| Binning | Support | - | Support | - |
| Gain | 0dB～27dB | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | |||
| Exposure Time | 184μs～1s | 53μs～1s | ||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
| Image Buffer | 256MB on-board buffer | 128MB | ||
| User Setting | Support two sets of user-defined configurations | |||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
| Weigth | 88g | 68g | ||
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
| Power Consumption | 12V≈3.4W | ≈3.2W | ||
| Lens Mount | C | |||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | |||
Specification
| Model | A5B57MG200E |
| Interface | GigE/PoE |
| Mono/Color | Mono |
| Resolution | 25MP (5120x5120) |
| Image Sensor | CMOS / GMAX0505 |
| Sensor Size | 1.1" |
| Pixel Size | 2.5x2.5 um |
| Shutter | Global |
| SNR | >35dB |
| Dynamic Range | >64dB |
| Frame Rate | 4 fps |
| Bit Depth | 12 |
| Image Format | Mono8/10/10Packed/12/12Packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output |
| Binning | Support |
| Decimation | -- |
| Gain | x1～x32 |
| Gamma | Range from 0 to 4, support LUT |
| Exposure Time | 5μs～1s |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode |
| Image Buffer | 128MB |
| User Setting | Support two sets of user-defined configurations |
| Dimensions | 29mmx29mmx58mm (not including lens mount and rear case connector) |
| Weigth | 100g |
| Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V |
| Power Consumption | 12V≈4.0W |
| Lens Mount | C |
| Temperature | Storage temperature: -30℃～+ 80℃, Operation temperature: -30℃～+ 50℃ |
Specification
| Model | A7A20MU30E | A7A20CU30E |
| Interface | USB3.0 | |
| Mono/Color | Mono | Color |
| Resolution | 12MP（4096 ｘ 300０） | |
| Image Sensor | CMOS / IMX253 | |
| Sensor Size | 1.1" | |
| Pixel Size | 3.45 x 3.45（μm） | |
| Shutter | Global | |
| SNR | >38dB | |
| Dynamic Range | 70dB | |
| Frame Rate | 30fps | |
| Bit Depth | 10 | |
| Pixel Format | Mono8/10/10Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
| Binning | Support | - |
| Gain | ｘ1～ｘ32 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 26μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 64MB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 29mmx44mmx58mm( not including lens mount and rear case connector) | |
| Weigth | 91g | |
| Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | |
| Power Consumption | ≈4.2W | |
| Lens Mount | C | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |
Specification
| Model | A7A20MG9E | A7A20CG9E | A7A20MU201E | A7A20CU201E | A7A20MK401E |
| Interface | GigE／PoE | USB3.0 | CameraLink | ||
| Mono/Color | Mono | Color | Mono | Color | Mono |
| Resolution | 12.3MP（4096x3000) | ||||
| Image Sensor | CMOS / IMX304 | ||||
| Sensor Size | 1.1" | ||||
| Pixel Size | 3.45 x 3.45（μm） | ||||
| Shutter | Global | ||||
| SNR | >38dB | ||||
| Dynamic Range | 70dB | ||||
| Frame Rate | 9fps | 23.4fps | 20 | ||
| Bit Depth | 12 | 10 | |||
| Pixel Format | Mono8/ 10/10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed | Mono8/10 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
| Binning | Support | ｰ | Support | - | ｰ |
| Gain | 0dB～48dB | ｘ1～ｘ32 | |||
| Gamma | Range from 0 to 4, support LUT | ｰ | |||
| Exposure Time | 48μs～1s | 29μs～1s | |||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
| Image Buffer | 128MB | 64MB | ｰ | ||
| User Setting | Support two sets of user-defined configurations | ||||
| Dimensions | 29mmx44mmx58mm ( not including lens mount and rear case connector) | 29mmx29mmx43.８mm ( not including lens mount and rear case connector) |
|||
| Weigth | 100g | 91g | 80g | ||
| Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL or DC power via Hirose, range from 6 ~24V | ||
| Power Consumption | 12V≈3.2W | ≈4.0W | ≈2.4W | ||
| Lens Mount | C | ||||
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | ||||
Specification
| Model | A7A21MG400E | A7A21MK401E | A7A21MK200E |
| Interface | GigE／PoE | CameraLink | |
| Mono/Color | Mono | ||
| Resolution | 12MP（4096x3072) | ||
| Image Sensor | CMOS / XGS12000 | ||
| Sensor Size | 1" | ||
| Pixel Size | 3.2 x 3.2（μm） | ||
| Shutter | Global | ||
| SNR | >38dB | ||
| Dynamic Range | 70dB | ||
| Frame Rate | 9fps | 18fps | 56fps |
| Bit Depth | 12 | 10 | |
| Pixel Format | Mono8/10/10Packed | Mono8/10 | |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink for camera control and data transmission, support base/medium/Full/Deca work mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable IO |
|
| Binning | Support | - | |
| Gain | ｘ1～ｘ32 | ||
| Gamma | Range from 0 to 4, support LUT | - | |
| Exposure Time | 19μs～1s | 17μs～1s | 52μs～1s |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
| Image Buffer | 64MB | - | |
| User Setting | Support two sets of user-defined configurations | ||
| Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) | 29mmx４４mmx５8mm ( not including lens mount and rear case connector) |
| Weigth | 88g | 80g | ≈100g |
| Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 24V | |
| Power Consumption | 12≈3.2W | 2.4W | ≈3W |
| Lens Mount | C | ||
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | ||
Specification
| Model | A5A21MG9E | A5A21CG9E |
| Interface | GigE | |
| Mono/Color | Mono | Color |
| Resolution | 12MP（4096 ｘ 3072） | |
| Image Sensor | CMOS / PYTHON 12K | |
| Sensor Size | 4/3" | |
| Pixel Size | 4.5 x 4.5（μm） | |
| Shutter | Global | |
| SNR | >41dB | |
| Dynamic Range | 59dB | |
| Frame Rate | 9fps | |
| Bit Depth | 10 | |
| Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed , BayerGB8/10/10Packed , YUV422Packed, RGB8Packed |
| GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | |
| Binning | Support | |
| Gain | ｘ1～ｘ6 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 1μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 128MB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 76mmx76mmx46mm( not including lens mount and rear case connector) | |
| Weigth | 450g | |
| Power Supply | Support 12～24V DC wide range power supply | |
| Power Consumption | 12V≈9W | |
| Lens Mount | M58(FBL 12.3) | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |
Specification
| Model | AX5A22MX050E | AX5A22CX050E | AX5A22MX060E | AX5A22CX060E | AX5A22MX340E | AX5A22CX340E |
| Interface | CoaXPress- 6 | |||||
| Mono/Color | Mono | Color | Mono | Color | Mono | Color |
| Resolution | １２MP（４０９６x３０７２） | |||||
| Image Sensor | CMOS / CMV12000 | |||||
| Sensor Size | 1.8" | |||||
| Pixel Size | 5.5 x 5.5（μm） | |||||
| Shutter | Global | |||||
| SNR | 41.3dB | |||||
| Dynamic Range | 60dB | |||||
| Frame Rate | １８８fps | |||||
| Bit Depth | 12 | |||||
| Pixel Format | Mono8/10/12 | BayerBG8/10/12 | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 |
| GPIO | 6-pin Hirose: 3*configurable input/output | |||||
| Binning | ｰ | |||||
| Gain | Gain 1 ～ 4, GainRaw(Digital Gain) 1 ～ 100 | |||||
| Gamma | Range from 0 to 4, support LUT | |||||
| Exposure Time | 50μs ～ 5s | |||||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
| Image Buffer | ｰ | |||||
| User Setting | Support two sets of user-defined configurations | |||||
| Dimensions | 72mmx72mmx72mm ( not including lens mount and rear case connector) | 80mmx８０mmx47mm ( not including lens mount and rear case connector) |
||||
| Weigth | 390g | |||||
| Power Supply | 24VDC power supply via Hirose, support PoCXP | |||||
| Power Consumption | ≤15W | |||||
| Lens Mount | M58 (FBL 12) | F | M42 | |||
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |||||
Specification
| Model | A5B51MG4E | A5B51CG4E |
| Interface | GigE | |
| Mono/Color | Mono | Color |
| Resolution | 25MP（5120 ｘ ５１２０） | |
| Image Sensor | CMOS / PYTHON 25K | |
| Sensor Size | APS-H | |
| Pixel Size | 4.5 x 4.5（μm） | |
| Shutter | Global | |
| SNR | 41dB | |
| Dynamic Range | 59dB | |
| Frame Rate | 4fps | |
| Bit Depth | 10 | |
| Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed , BayerGB8/10/10Packed , YUV422Packed, RGB8Packed |
| GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | |
| Binning | Support | |
| Gain | ｘ1～ｘ6 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 1μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 128MB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 76mmx76mmx46mm( not including lens mount and rear case connector) | |
| Weigth | 450g | |
| Power Supply | Support 12～24V DC wide range power supply | |
| Power Consumption | 12V≈9W | |
| Lens Mount | M58(FBL 12.3) | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |
Specification
| Model | AX5B51MT250E | AX5B51CT250E |
| Interface | １０GigE | |
| Mono/Color | Mono | Color |
| Resolution | 25MP（5120 ｘ ５１２０） | |
| Image Sensor | CMOS / PYTHON 25K | |
| Sensor Size | 23.0x23.0(ｍｍ) | |
| Pixel Size | 4.5 x 4.5（μm） | |
| Shutter | Global | |
| SNR | 41dB | |
| Dynamic Range | 59dB | |
| Frame Rate | 43fps | |
| Bit Depth | 10 | |
| Pixel Format | Mono8/10/10Packed | BayerRG8/10/10Packed , BayerGB8/10/10Packed |
| GPIO | 12-pin Hirose connector includes external power supply, 3-opto isolated inputs and 3-opto isolated outputs | |
| Binning | Support | |
| Gain | ｘ1～ｘ32 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 1μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 1GB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 72mmx72mmx７８mm( not including lens mount and rear case connector) | |
| Weigth | 583g | |
| Power Supply | DC power supply by Hirose connector , with voltage range from 12V to 24V | |
| Power Consumption | 24V≈21.6W | |
| Lens Mount | M58(FBL 12.3) | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |
Specification
| Model | AX7A20CT250E |
| Interface | 10GigE |
| Mono/Color | Color |
| Resolution | 12MP（4096 ｘ 3000） |
| Image Sensor | CMOS / IMX253 |
| Sensor Size | 1.1" |
| Pixel Size | 3.45 x 3.45（μm） |
| Shutter | Global |
| SNR | 39.7dB |
| Dynamic Range | 71.6dB |
| Frame Rate | 68fps |
| Bit Depth | 10 |
| Pixel Format | BayerRG8/BayerGB8/BayerRG10/BayerGB10/BayerRG10Packed/BayerGB10Packed |
| GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output, 1 RS232 serial port |
| Binning | - |
| Gain | ｘ1～ｘ32 |
| Gamma | Range from 0 to 4, support LUT |
| Exposure Time | 1μs～1s |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode |
| Image Buffer | 1GB |
| User Setting | Support two sets of user-defined configurations |
| Dimensions | 72mmx72mmx78mm( not including lens mount and rear case connector) |
| Weigth | ≈583g |
| Power Supply | DC power supply by Hirose connector,with voltage range from 12V to 24V |
| Power Consumption | 24V≈18.7W |
| Lens Mount | M58*0.75(FBL 12) |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ |
Specification
| Model | AX7B96MG050/1E | AX7B96MG060/1E | AX7B96MK050/1E | AX7B96MK060/1E |
| Interface | GigE | CameraLink | ||
| Mono/Color | Mono | |||
| Resolution | 29MP（6576 x 4384） | |||
| Image Sensor | CCD / KAI29050 | |||
| Sensor Size | 35(ｍｍ) | |||
| Pixel Size | 5.5 x 5.5（μm） | |||
| Shutter | Global | |||
| SNR | >41dB | |||
| Dynamic Range | 60dB | |||
| Frame Rate | 4fps | |||
| Bit Depth | 14 | |||
| Pixel Format | Mono8/10/10Packed | |||
| GPIO | 12 pin Hirose: 3 configurable input/output without opto isolation; 1 RS232 serial port | |||
| Binning | - | |||
| Gain | ｘ1～ｘ１６ | |||
| Gamma | Range from 0 to 4, support LUT | |||
| Exposure Time | 30μs～1s | |||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
| Image Buffer | 336MB | - | ||
| User Setting | Support two sets of user-defined configurations | |||
| Dimensions | 72mmx72mmx53mm ( not including lens mount and rear case connector) | 72mmx72mmx54mm ( not including lens mount and rear case connector) |
||
| Weigth | 390g | |||
| Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | |||
| Power Consumption | 24V≈13W | 24V≈8W | ||
| Lens Mount | F | M58 (FBL 12) | ||
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |||
Specification
| Model | A9B57MX250E | A9B57CX250E |
| Interface | CoaXPress- 6 | |
| Mono/Color | Mono | Color |
| Resolution | ２５MP（５１２０x５１２０） | |
| Image Sensor | CMOS / GMAX0505 | |
| Sensor Size | 1.１" | |
| Pixel Size | 2.5 x 2.5（μm） | |
| Shutter | Global | |
| SNR | 41.3dB | |
| Dynamic Range | ６0dB | |
| Frame Rate | ９０fps | |
| Bit Depth | 12 | |
| Pixel Format | Mono8/10/12 | BayerBG8/10/12 |
| GPIO | 12-pin Hirose port:3 Opto-isolated inputs, 3 Opto-isolated outputs, 1 RS232 serial port | |
| Binning | ｰ | |
| Gain | Analog Gain 0.4 ~ 6.6, GainRaw(Digital Gain) 1 ~ 100 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 25μs ～ 5s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | ｰ | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 72mmx72mmx72mm ( not including lens mount and rear case connector) |
|
| Weigth | 650g | |
| Power Supply | 24VDC power supply via Hirose, support PoCXP | |
| Power Consumption | 24V≤15W | |
| Lens Mount | M58 | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |
Specification
| Model | A9B57MP050E | A9B57CP050E | A9B57MP340E | A9B57CP340E | A9B57MP350E | A9B57CP350E |
| Interface | CoaXPress- 12 | |||||
| Mono/Color | Mono | Color | Mono | Color | Mono | Color |
| Resolution | ２５MP（５１２０x５１２０） | |||||
| Image Sensor | CMOS / GMAX0505 | |||||
| Sensor Size | 1.１" | |||||
| Pixel Size | 2.5 x 2.5（μm） | |||||
| Shutter | Global | |||||
| SNR | 41.3dB | |||||
| Dynamic Range | 60dB | |||||
| Frame Rate | １50fps | |||||
| Bit Depth | 12 | |||||
| Pixel Format | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 |
| GPIO | 12-pin Hirose: 3*opto-isolated input/output, 1*RS232 serial port | |||||
| Binning | ｰ | |||||
| Gain | Analog Gain 0.4 ～ 6.6, GainRaw(Digital Gain) 1 ～ 100 | |||||
| Gamma | Range from 0 to 4,support LUT | |||||
| Exposure Time | 15μs ～ 5s | |||||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
| Image Buffer | ｰ | |||||
| User Setting | Support two sets of user-defined configurations | |||||
| Dimensions | 80mmx８０mmx72(not including lens mount and rear case connector) | 80mmx８０mmx65(not including lens mount and rear case connector) | ||||
| Weigth | 910g | 650g | ||||
| Power Supply | DC 24V power supply over Hirose connector and support PoCXP |
|||||
| Power Consumption | 24V≤15W | |||||
| Lens Mount | M58(FBL12) | M42(FBL12) | M58(FBL12) | |||
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -30℃ ～ +50℃ | |||||
Specification
| Model | S5A20MG000E |
| Image Sensor | CMOS / IMX226 |
| Resolution | 12MP（4000 ｘ 3000） |
| Frame Rate | 10fps |
| Shutter | Rolling |
| Mono/Color | Mono |
| Sensor Size | 1/1.7" |
| Pixel Size | 1.85 x 1.85（μm） |
| SNR | >38dB |
| Dynamic Range | 66dB |
| Bit Depth | 10 |
| Exposure Time | 32μs～1s |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode |
| Processor | Movidius Myraid 2 VPU |
| Interface | M12 8-pin Ethernet, M12 12-pin GPIO |
| GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output |
| Memory | 512MB RAM and 512MB non-volatile flash memory |
| SDK | SVStudio |
| Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) |
| LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators |
| Lens Mount | Support C-mount, M12 mount and optional built-in illumination |
| Power Supply | Support 8～26V DC wide range power supply |
| IP Rating | IP67 with lens cover |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -20℃ ～ +50℃ |
Specification
| Model | S5B00MG000E |
| Image Sensor | CMOS / IMX183 |
| Resolution | 20MP（5472 ｘ 3600） |
| Frame Rate | 10fps |
| Shutter | Rolling |
| Mono/Color | Mono |
| Sensor Size | 1" |
| Pixel Size | 2.4 x 2.4（μm） |
| SNR | >38dB |
| Dynamic Range | 66dB |
| Bit Depth | 10 |
| Exposure Time | 32μs～1s |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode |
| Processor | Movidius Myraid 2 VPU |
| Interface | M12 8-pin Ethernet, M12 12-pin GPIO |
| GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output |
| Memory | 512MB RAM and 512MB non-volatile flash memory |
| SDK | SVStudio |
| Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) |
| LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators |
| Lens Mount | Support C-mount, M12 mount and optional built-in illumination |
| Power Supply | Support 8～26V DC wide range power supply |
| IP Rating | IP67 with lens cover |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -20℃ ～ +50℃ |
