A3124
A3131
A3135
A3138
A3200
S5131
S5201
Specification
| Model | A3124MG100E | A3124CG100E |
| Interface | GigE | |
| Mono/Color | Mono | Color |
| Resolution | 1.2MP (1280 x 960) | |
| Image Sensor | CMOS / AR0135 | |
| Sensor Size | 1/3" | |
| Pixel Size | 3.75 x 3.75 um | |
| Shutter | Global | |
| SNR | 40.7dB | |
| Dynamic Range | 71.1dB | |
| Frame Rate | 54 fps | |
| Bit Depth | 12 | |
| Image Format | Mono8/10/10Packed/12/12Packed | " Mono8,BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
| Binning | Support | - |
| Gain | x1～x32 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 1μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 64MB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) |
|
| Weigth | 69g | |
| Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈2.8W | |
| Lens Mount | C | |
| Temperature | Storage temperature: -30℃～+ 80℃, Operation temperature: -30℃～+ 50℃ | |
Specification
| Model | A3131MG100E | A3131MG000E | A3131CG000E |
| Interface | GigE | GigE／PoE | |
| Mono/Color | Mono | Color | |
| Resolution | 1.3MP（1280 ｘ 1024） | ||
| Image Sensor | CMOS / PYTHON 1300 | ||
| Sensor Size | 1/2" | ||
| Pixel Size | 4.8 x 4.8（μm） | ||
| Shutter | Global | ||
| SNR | >38dB | ||
| Dynamic Range | 60dB | ||
| Frame Rate | 60fps | ||
| Bit Depth | 10 | ||
| Image Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed |
|
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||
| Binning | Support | - | |
| Gain | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | ||
| Exposure Time | 1μs～1s | ||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
| Image Buffer | 64MB | ||
| User Setting | Support two sets of user-defined configurations | ||
| Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | 29mmx29mmx42mm (not including lens mount and rear case connector) |
|
| Weigth | 60g | 88g | |
| Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | POE/DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈2.8W | ||
| Lens Mount | C | ||
| Temperature | Storage temperature: -30℃～+ 80℃, Operation temperature: -30℃～+ 50℃ | ||
Specification
| Model | A3135MG000E | A3135CG000E | A3135MU000E | A3135CU000E |
| Interface | GigE / PoE | USB3.0 | ||
| Mono/Color | Mono | Color | Mono | Color |
| Resolution | 1.2MP（1280 ｘ 960） | |||
| Image Sensor | CCD / RJ33J4CA0DT | |||
| Sensor Size | 1/3" | |||
| Pixel Size | 3.75 x 3.75（μm） | |||
| Shutter | Global | |||
| SNR | >38dB | |||
| Dynamic Range | 63dB | |||
| Frame Rate | 30 fps | 33 fps | ||
| Bit Depth | 14 | |||
| Image Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | Mono8/10/10Packed | BayerRG8/10/10packed, BayerRB8/10/10packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
| Binning | Support | - | Support | - |
| Gain | x1～x32 | |||
| Gamma | Range from 0 to 4, support LUT | |||
| Exposure Time | 1μs～1s | |||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
| Image Buffer | 64MB | |||
| User Setting | Support two sets of user-defined configurations | |||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
| Weigth | 88g | 68g | ||
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
| Power Consumption | 12V≈3.2W | 2.4W | ||
| Lens Mount | C | |||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | |||
Specification
| Model | A3138MU000E | A3138CU000E |
| Interface | USB3.0 | |
| Mono/Color | Mono | Color |
| Resolution | 1.3MP (1280x1024) | |
| Image Sensor | CMOS / SC130GS | |
| Sensor Size | 1/2.7" | |
| Pixel Size | 4.0 x 4.0（μm） | |
| Shutter | Global | |
| SNR | 40dB | |
| Dynamic Range | 60dB | |
| Frame Rate | 201fps | |
| Bit Depth | 10 | |
| Image Format | Mono8/10/10Packed | BayerRG8/10/10Packed, BayerGB8/10/10Packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
| Binning | Support | - |
| Gain | x1～x32 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 10μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 64MB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | |
| Weigth | 68g | |
| Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 2.8W | |
| Lens Mount | C | |
| Temperature | Storage temperature: -30℃～+ 80℃, Operation temperature: -30℃～+ 50℃ | |
Specification
| Model | A3200MG004E | A3200CG000E | A3200CU000E |
| Interface | GigE / PoE | USB3.0 | |
| Mono/Color | Mono | Color | |
| Resolution | 2.07MP（1920 x 1080） | ||
| Image Sensor | CMOS / IM290 | ||
| Sensor Size | 1/2.8" | ||
| Pixel Size | 2.9 x 2.9（μm） | ||
| Shutter | Rolling | ||
| SNR | >38dB | ||
| Dynamic Range | Support DOL-HDR | 66dB | |
| Frame Rate | 22 | 120 | |
| Bit Depth | 10 | 10 | |
| Image Format | Mono8 | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|
| Gain | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | ||
| Exposure Time | 17.5μs～1s | 8μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
| Image Buffer | 64MB | ||
| User Setting | Support two sets of user-defined configurations | ||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
|
| Weigth | 88g | 68g | |
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈3.3W | ≈2.8W | |
| Lens Mount | C | ||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | ||
Specification
| Model | S5131MG000E | S5131MG001E |
| Image Sensor | CMOS / Python1300 | |
| Resolution | 1.3MP（1280 ｘ 1022） | |
| Frame Rate | 60fps | |
| Shutter | Global | |
| Mono/Color | Mono | |
| Sensor Size | 1/2" | |
| Pixel Size | 4.8 x 4.8（μm） | |
| SNR | >38dB | |
| Dynamic Range | 60dB | |
| Bit Depth | 10 | |
| Exposure Time | 16μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Processor | Movidius Myraid 2 VPU | |
| Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
| GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
| Memory | 512MB RAM and 512MB non-volatile flash memory | |
| SDK | SVStudio | |
| Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
| LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
| Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
| Power Supply | Support 8～26V DC wide range power supply | DC24V1.5A |
| IP Rating | IP67 with lens cover | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -20℃ ～ +50℃ | |
Specification
| Model | S5201MG000E | S5201MG001E |
| Image Sensor | CMOS / Python2000 | |
| Resolution | 2MP（1920 ｘ 1200） | |
| Frame Rate | 45fps | |
| Shutter | Global | |
| Mono/Color | Mono | |
| Sensor Size | 2/3" | |
| Pixel Size | 4.8 x 4.8（μm） | |
| SNR | >38dB | |
| Dynamic Range | 60dB | |
| Bit Depth | 10 | |
| Exposure Time | 4μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Processor | Movidius Myraid 2 VPU | |
| Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
| GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
| Memory | 512MB RAM and 512MB non-volatile flash memory | |
| SDK | SVStudio | |
| Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
| LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
| Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
| Power Supply | Support 8～26V DC wide range power supply | DC24V1.5A |
| IP Rating | IP67 with lens cover | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -20℃ ～ +50℃ | |
