A3051
A3124
A3131
A3135
A3138
A3200
A3504
A3600
A3A20
A3B00
A5031
A5051
A5131
A5201-1
A5201-2
A5402
A5501
A5B57
A7040
A7160
A7170
A7200
A7300
A7500-1
A7500-2
A7710
A7801
A7900
A7A20-1
A7A20-2
A7A21
A5A21
AX5A22
A5B51
AX5B51
AX5E02
AX5E07
AX5F57
AX7B96
AX7C10
AX7D36
AX7Q00(10)
A9B57-1
A9B57-2
S5051
S5131
S5201
S5501
D5201MG100E
S5600
S5A20
S5B00
Specification
Model | A3051MG100E | A3051MG000E | A3051CG000E |
Interface | GigE | GigE/P0E | |
Mono/Color | Mono | Color | |
Resolution | 0.5MP(800 x 600) | ||
Image Sensor | CMOS / PYTHON 480 | ||
Sensor Size | 1/3.6" | ||
Pixel Size | 4.8 x 4.8(μm) | ||
Shutter | Global | ||
SNR | >38dB | ||
Dynamic Range | 60dB | ||
Frame Rate | 120fps | ||
Bit Depth | 10 | ||
Image Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed |
|
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||
Binning | Support | - | |
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 1μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 64MB | ||
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | 29mmx29mmx42mm (not including lens mount and rear case connector) |
|
Weigth | 60g | 88g | |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | POE/DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 12V≈2.8W | ||
Lens Mount | C | ||
Temperature | Storage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃ |
Specification
Model | A3124MG100E | A3124CG100E |
Interface | GigE | |
Mono/Color | Mono | Color |
Resolution | 1.2MP (1280 x 960) | |
Image Sensor | CMOS / AR0135 | |
Sensor Size | 1/3" | |
Pixel Size | 3.75 x 3.75 um | |
Shutter | Global | |
SNR | 40.7dB | |
Dynamic Range | 71.1dB | |
Frame Rate | 54 fps | |
Bit Depth | 12 | |
Image Format | Mono8/10/10Packed/12/12Packed | " Mono8,BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 1μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) |
|
Weigth | 69g | |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 12V≈2.8W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A3131MG100E | A3131MG000E | A3131CG000E |
Interface | GigE | GigE/PoE | |
Mono/Color | Mono | Color | |
Resolution | 1.3MP(1280 x 1024) | ||
Image Sensor | CMOS / PYTHON 1300 | ||
Sensor Size | 1/2" | ||
Pixel Size | 4.8 x 4.8(μm) | ||
Shutter | Global | ||
SNR | >38dB | ||
Dynamic Range | 60dB | ||
Frame Rate | 60fps | ||
Bit Depth | 10 | ||
Image Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed |
|
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||
Binning | Support | - | |
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 1μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 64MB | ||
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | 29mmx29mmx42mm (not including lens mount and rear case connector) |
|
Weigth | 60g | 88g | |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | POE/DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 12V≈2.8W | ||
Lens Mount | C | ||
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A3135MG000E | A3135CG000E | A3135MU000E | A3135CU000E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 1.2MP(1280 x 960) | |||
Image Sensor | CCD / RJ33J4CA0DT | |||
Sensor Size | 1/3" | |||
Pixel Size | 3.75 x 3.75(μm) | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 63dB | |||
Frame Rate | 30 fps | 33 fps | ||
Bit Depth | 14 | |||
Image Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | Mono8/10/10Packed | BayerRG8/10/10packed, BayerRB8/10/10packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
Binning | Support | - | Support | - |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
Weigth | 88g | 68g | ||
Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.2W | 2.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃ |
Specification
Model | A3138MU000E | A3138CU000E |
Interface | USB3.0 | |
Mono/Color | Mono | Color |
Resolution | 1.3MP (1280x1024) | |
Image Sensor | CMOS / SC130GS | |
Sensor Size | 1/2.7" | |
Pixel Size | 4.0 x 4.0(μm) | |
Shutter | Global | |
SNR | 40dB | |
Dynamic Range | 60dB | |
Frame Rate | 201fps | |
Bit Depth | 10 | |
Image Format | Mono8/10/10Packed | BayerRG8/10/10Packed, BayerGB8/10/10Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 10μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | |
Weigth | 68g | |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 2.8W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A3200MG004E | A3200CG000E | A3200CU000E |
Interface | GigE / PoE | USB3.0 | |
Mono/Color | Mono | Color | |
Resolution | 2.07MP(1920 x 1080) | ||
Image Sensor | CMOS / IM290 | ||
Sensor Size | 1/2.8" | ||
Pixel Size | 2.9 x 2.9(μm) | ||
Shutter | Rolling | ||
SNR | >38dB | ||
Dynamic Range | Support DOL-HDR | 66dB | |
Frame Rate | 22 | 120 | |
Bit Depth | 10 | 10 | |
Image Format | Mono8 | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 17.5μs~1s | 8μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 64MB | ||
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
|
Weigth | 88g | 68g | |
Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 12V≈3.3W | ≈2.8W | |
Lens Mount | C | ||
Temperature | Storage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃ |
Specification
Model | A3504MG100E | A3504CG100E |
Interface | GigE | |
Mono/Color | Mono | Color |
Resolution | 5.0MP (2592 x 1944) | |
Image Sensor | CMOS / AR0521 | |
Sensor Size | 1/2.5" | |
Pixel Size | 2.2 x 2.2 um | |
Shutter | Rolling | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Frame Rate | 23 fps | |
Bit Depth | 12 | |
Image Format | Mono8/10/10Packed/12/12Packed | Mono8,BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 21.5μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | |
Weigth | 69g | |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 12V≈2.8W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A3600MG100E | A3600MG18E | A3600CG18E | A3600MU60E | A3600CU60E |
Interface | GigE | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color | |
Resolution | 6.2MP(3072 x 2048) | ||||
Image Sensor | CMOS / IMX178 | ||||
Sensor Size | 1/1.8" | ||||
Pixel Size | 2.4 x 2.4(μm) | ||||
Shutter | Rolling | ||||
SNR | >38dB | ||||
Dynamic Range | 66dB | ||||
Frame Rate | 18fps | 60fps | |||
Bit Depth | 12 | 10 | |||
Image Format | Mono8/10/10Packed /12/12Packed | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
Binning | Support | - | Support | ||
Gain | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | ||||
Exposure Time | 25μs~1s | 8μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ||||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
Weigth | 60g | 88g | 68g | ||
Power Supply | DC power supply by Hirose connector,with voltage range from 6V to 26V | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | ≈2.4W | |||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃ |
Specification
Model | A3A20MG8E | A3A20CG8E | A3A20MU24E | A3A20CU24E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 12MP(4000x3000) | |||
Image Sensor | CMOS/ IMX226 | |||
Sensor Size | 1/1.7" | |||
Pixel Size | 1.85x1.85(μm) | |||
Shutter | Rolling | |||
SNR | >38dB | |||
Dynamic Range | 66dB | |||
Frame Rate | 9 fps | 24 fps | ||
Bit Depth | 12 | 10 | ||
Image Format | Mono8/10/10Packed /12/12Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
Binning | Support | - | Support | - |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 143μs~15s | 55μs~15s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
Weigth | 88g | 68g | ||
Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | 2.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃ |
Specification
Model | A3B00MG000E | A3B00CG000E | A3B00MU000E | A3B00CU000E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 20MP(5472x3648) | |||
Image Sensor | CMOS/ IMX183 | |||
Sensor Size | 1" | |||
Pixel Size | 2.4x2.4 (μm) | |||
Shutter | Rolling | |||
SNR | >38dB | |||
Dynamic Range | 66dB | |||
Frame Rate | 5.8fps | 19.66 fps | ||
Bit Depth | 10 | |||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8/10/10Packed, BayerGB8/10/10Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
Binning | Support | - | Support | - |
Gain | 0dB~27dB | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 184μs~1s | 53μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 256MB on-board buffer | 128MB | ||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
Weigth | 88g | 68g | ||
Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | ≈3.2W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃ |
Specification
Model | A5031MG300E | A5031CG300E | A5031MU815E | A5031CU815E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 0.3MP (640 x 480) | |||
Image Sensor | CMOS / PYTHON 300 | |||
Sensor Size | 1/4" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 300fps | 815fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 69g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.2W | ≈3.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5051MG200E | A5051CG200E | A5051MU545U | A5051CU545U |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 0.5MP (800 x 600) | |||
Image Sensor | CMOS / Python500 | |||
Sensor Size | 1/3.6" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 200fps | 545fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.3W | ≈3.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5131MG75E | A5131CG75E | A5131MU210E | A5131CU210E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 1.3MP (1280 x 1024) | |||
Image Sensor | CMOS / PYTHON 1300 | |||
Sensor Size | 1/2" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 75fps | 210fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
ROI | Support | |||
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | ≈3.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5201MG50E | A5201CG50E | A5201MU150E | A5201CU150E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 2.3MP (1920 x 1200) | |||
Image Sensor | CMOS / PYTHON 2000 | |||
Sensor Size | 2/3" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 50fps | 150fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | ≈3.8W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5201MK402E | A5201CK402E |
Interface | CameraLink | |
Mono/Color | Mono | Color |
Resolution | 2.3MP (1920 x 1200) | |
Image Sensor | CMOS / PYTHON2000 | |
Sensor Size | 2/3" | |
Pixel Size | 4.8 x 4.8(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Frame Rate | 37.8fps | |
Bit Depth | 10 | |
Image Format | Mono8/10 | BayerRG8/10 |
GPIO | CameraLink is used for camera control and data transmission | |
Binning | - | |
Gain | 0dB ~ 15.56dB | |
Gamma | - | |
Exposure Time | 16μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx43.8mm (not including lens mount and rear case connector) | |
Weigth | 80g | |
Power Supply | PoCL power supply | |
Power Consumption | 2.31W | 2.34W |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A5402MU90E | A5402CU90E |
Interface | USB3.0 | |
Mono/Color | Mono | Color |
Resolution | 4.1MP (2048 x 2048) | |
Image Sensor | CMOS / CMV4000 | |
Sensor Size | 1" | |
Pixel Size | 5.5 x 5.5(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Frame Rate | 90fps | |
Bit Depth | 10 | |
Image Format | Mono8 | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|
Binning | Support | -- |
Gain | x1 ~ x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 32μs~15s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | |
Weigth | 60g | |
Power Supply | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | |
Power Consumption | 2.31W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A5501MG20E | A5501CG20E | A5501MU60E | A5501CU60E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 5.3MP (2592 x 2048) | |||
Image Sensor | CMOS / PYTHON 5000 | |||
Sensor Size | 1" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 20fps | 60fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | 1μs ~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.8W | ≈3.8W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5B57MG200E |
Interface | GigE/PoE |
Mono/Color | Mono |
Resolution | 25MP (5120x5120) |
Image Sensor | CMOS / GMAX0505 |
Sensor Size | 1.1" |
Pixel Size | 2.5x2.5 um |
Shutter | Global |
SNR | >35dB |
Dynamic Range | >64dB |
Frame Rate | 4 fps |
Bit Depth | 12 |
Image Format | Mono8/10/10Packed/12/12Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output |
Binning | Support |
Decimation | -- |
Gain | x1~x32 |
Gamma | Range from 0 to 4, support LUT |
Exposure Time | 5μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode |
Image Buffer | 128MB |
User Setting | Support two sets of user-defined configurations |
Dimensions | 29mmx29mmx58mm (not including lens mount and rear case connector) |
Weigth | 100g |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V |
Power Consumption | 12V≈4.0W |
Lens Mount | C |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A7040MG000E | A7040CG000E | A7040MU000E | A7040CU000E | A7040MK402E | A7040CK402E |
Interface | GigE/PoE | USB3.0 | CameraLink | |||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 0.4MP(720x540) | |||||
Image Sensor | CMOS / IMX287 | |||||
Sensor Size | 1/2.9" | |||||
Pixel Size | 6.9 x 6.9(μm) | |||||
Shutter | Global | |||||
SNR | >38dB | |||||
Dynamic Range | 70dB | |||||
Frame Rate | 300fps | 439fps | 349fps | |||
Bit Depth | 12 | 10 | ||||
Pixel Format | Mono8/10/ 10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed/12/ 12Packed , BayerGB8/10/ 10Packed/12/ 12Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed, BayerGB8/10/ 10Packed | Mono8/10 | Mono8, BayerRG8/10 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base mode | ||||
Binning | Support | - | Support | - | ー | |
Gain | 0dB~48dB | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | |||||
Exposure Time | 20μs~1s | 16μs~1s | ||||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | 128MB | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) |
|||
Weigth | 88g | 60g | 80g | |||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL | |||
Power Consumption | 12V≈4W | ≈3.2W | ≈2.38W | |||
Lens Mount | C | |||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7160MG000E | A7160CG000E |
Interface | GigE/PoE | |
Mono/Color | Mono | Color |
Resolution | 1.6MP(1440 x 1080) | |
Image Sensor | CMOS / IMX273 | |
Sensor Size | 1/2.9" | |
Pixel Size | 3.45 x 3.45(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 70dB | |
Frame Rate | 77fps | |
Bit Depth | 12 | |
Pixel Format | Mono8/10/10Packed/12/12Packed | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, YUV422Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | 0dB~48dB | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 26μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 128MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx42mm( not including lens mount and rear case connector) | |
Weigth | 88g | |
Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | |
Power Consumption | 12V≈3.6W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7170MG200E | A7170CG200E |
Interface | GigE/PoE | |
Mono/Color | Mono | Color |
Resolution | 1.76MP(1604 x 1100) | |
Image Sensor | CMOS / IMX432 | |
Sensor Size | 1.1" | |
Pixel Size | 9.0 x 9.0(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 70dB | |
Frame Rate | 66fps | |
Bit Depth | 12 | |
Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 1μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx44mmx58mm( not including lens mount and rear case connector) | |
Weigth | 100g | |
Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | |
Power Consumption | 12V≈3.2W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7200MG30E | A7200CG30E | A7200MU001E | A7200MU130E | A7200CU130E |
Interface | GigE/PoE | USB3.0 | |||
Mono/Color | Mono | Color | Mono | Mono | Color |
Resolution | 2.3MP(1920x1200) | ||||
Image Sensor | CMOS / IMX249 | CMOS / IMX174 | |||
Sensor Size | 1/1.2" | ||||
Pixel Size | 5.86 x 5.86(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 39fps | 38.7fps | 164fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | Mono8/10/ 10Packed | BayerRG8/ BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
Binning | Support | - | Support | Support | - |
Gain | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | ||||
Exposure Time | 26μs~1s | 16μs~1s | 20μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ||||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
|||
Weigth | 88g | 60g | |||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | |||
Power Consumption | 12V≈2.8W | ≈3.0W | ≈3.91W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7300MG30E | A7300CG30E | A7300MU90E | A7300CU90E | A7300MK200E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 3.2MP(2048x1536) | ||||
Image Sensor | CMOS / IMX265 | CMOS / IMX252 | |||
Sensor Size | 1/1.8" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 36fps | 120fps | 188fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/ BayerGB8 | Mono8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base/medium/ Full/ Deca mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | - | Support | ー | ー |
Gain | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | ||||
Exposure Time | 32μs~1s | 20μs~1s | 1μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | 100g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL/ DC 6V~26V via Hirose connector | ||
Power Consumption | 12V≈3.0W | ≈3.91W | 12V≈3.04W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7500MU75E | A7500CU75E | A7500MK200E | A7500CK200E |
Interface | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 5MP(2448x2048) | |||
Image Sensor | CMOS / IMX250 | |||
Sensor Size | 2/3" | |||
Pixel Size | 3.45 x 3.45(μm) | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 70dB | |||
Frame Rate | 75fps | 160fps | ||
Bit Depth | 10 | 8 | ||
Pixel Format | Mono8/10/ 10Packed | BayerRG8, BayerGB8 | Mono8 | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base/medium/Full/Deca mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
||
Binning | Support | - | Support | - |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 21μs~1s | 8μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | - | ||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
||
Weigth | 60g | 100g | ||
Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | ||
Power Consumption | ≈4.2W | 12V≈3W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7500MG20E | A7500CG20E | A7500MU35E | A7500CU35E | A7500MK402E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 5MP(2448x2048) | ||||
Image Sensor | CMOS / IMX264 | ||||
Sensor Size | 2/3" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 20fps | 35fps | 37.2fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8, BayerGB8 | Mono8/10 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base mode | |||
Binning | Support | ー | Support | - | ー |
Gain | x1~x32 | 0dB~15.56dB | |||
Gamma | Range from 0 to 4, support LUT | ー | |||
Exposure Time | 34.23μs~1s | 28μs~1s | 16μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | 80g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL | ||
Power Consumption | 12V≈3.2W | ≈3.91W | ≈2.3W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7710MG200E | A7710CG200E |
Interface | GigE/PoE | |
Mono/Color | Mono | Color |
Resolution | 7MP(3208 x 2200) | |
Image Sensor | CMOS / IMX428 | |
Sensor Size | 1.1" | |
Pixel Size | 4.5 x 4.5(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 70dB | |
Frame Rate | 17fps | |
Bit Depth | 12 | |
Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed , BayerGB8/10/10Packed , YUV422Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 1μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx44mmx58mm( not including lens mount and rear case connector) | |
Weigth | 100g | |
Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | |
Power Consumption | 12V≈3.2W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7801MG400E |
Interface | GigE/PoE |
Mono/Color | Mono |
Resolution | 8.8MP(4096x2160) |
Image Sensor | CMOS / XGS8000 |
Sensor Size | 1/1.1" |
Pixel Size | 3.2 x 3.2(μm) |
Shutter | Global |
SNR | >38dB |
Dynamic Range | 70dB |
Frame Rate | 13fps |
Bit Depth | 12 |
Pixel Format | Mono8/10/10Packed/12/12Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation |
Binning | Support |
Gain | x1~x32 |
Gamma | Range from 0 to 4, support LUT |
Exposure Time | 69μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode |
Image Buffer | 64MB |
User Setting | Support two sets of user-defined configurations |
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) |
Weigth | 88g |
Power Supply | PoE /DC power supply by Hirose connector, with voltage range from 6V to 26V |
Power Consumption | 12V≈3.2W |
Lens Mount | C |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7900MU200E | A7900CU200E | A7900MG13E | A7900CG13E | A7900MU201E | A7900CU201E |
Interface | USB3.0 | GigE/PoE | USB3.0 | |||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 8.8MP(4096x2160) | |||||
Image Sensor | CMOS / IMX255 | CMOS / IMX267 | ||||
Sensor Size | 1" | |||||
Pixel Size | 3.45 x 3.45(μm) | |||||
Shutter | Global | |||||
SNR | >38dB | |||||
Dynamic Range | 70dB | |||||
Frame Rate | 40fps | 13fps | 32fps | |||
Bit Depth | 10 | 12 | ||||
Pixel Format | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed, BayerGB8/10/ 10Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed, BayerGB8/10/ 10Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed, BayerGB8/10/ 10Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||||
Binning | Support | - | Support | - | Support | ー |
Gain | x1~x32 | 0dB~48dB | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||||
Exposure Time | 26μs~1s | 1μs~1s | 29μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | 64MB | 128MB | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
|||||
Weigth | 91g | 100g | 91g | |||
Power Supply | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | |||
Power Consumption | ≈4.0W | 12V≈3.2W | ≈4.0W | |||
Lens Mount | C | |||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7A20MU30E | A7A20CU30E |
Interface | USB3.0 | |
Mono/Color | Mono | Color |
Resolution | 12MP(4096 x 3000) | |
Image Sensor | CMOS / IMX253 | |
Sensor Size | 1.1" | |
Pixel Size | 3.45 x 3.45(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 70dB | |
Frame Rate | 30fps | |
Bit Depth | 10 | |
Pixel Format | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 26μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx44mmx58mm( not including lens mount and rear case connector) | |
Weigth | 91g | |
Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | |
Power Consumption | ≈4.2W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7A20MG9E | A7A20CG9E | A7A20MU201E | A7A20CU201E | A7A20MK401E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 12.3MP(4096x3000) | ||||
Image Sensor | CMOS / IMX304 | ||||
Sensor Size | 1.1" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 9fps | 23.4fps | 20 | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/ 10/10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed | Mono8/10 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
Binning | Support | ー | Support | - | ー |
Gain | 0dB~48dB | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | ー | |||
Exposure Time | 48μs~1s | 29μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 128MB | 64MB | ー | ||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx44mmx58mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) |
|||
Weigth | 100g | 91g | 80g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL or DC power via Hirose, range from 6 ~24V | ||
Power Consumption | 12V≈3.2W | ≈4.0W | ≈2.4W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7A21MG400E | A7A21MK401E | A7A21MK200E |
Interface | GigE/PoE | CameraLink | |
Mono/Color | Mono | ||
Resolution | 12MP(4096x3072) | ||
Image Sensor | CMOS / XGS12000 | ||
Sensor Size | 1" | ||
Pixel Size | 3.2 x 3.2(μm) | ||
Shutter | Global | ||
SNR | >38dB | ||
Dynamic Range | 70dB | ||
Frame Rate | 9fps | 18fps | 56fps |
Bit Depth | 12 | 10 | |
Pixel Format | Mono8/10/10Packed | Mono8/10 | |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink for camera control and data transmission, support base/medium/Full/Deca work mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable IO |
|
Binning | Support | - | |
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | - | |
Exposure Time | 19μs~1s | 17μs~1s | 52μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 64MB | - | |
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
Weigth | 88g | 80g | ≈100g |
Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 24V | |
Power Consumption | 12≈3.2W | 2.4W | ≈3W |
Lens Mount | C | ||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A5A21MG9E | A5A21CG9E |
Interface | GigE | |
Mono/Color | Mono | Color |
Resolution | 12MP(4096 x 3072) | |
Image Sensor | CMOS / PYTHON 12K | |
Sensor Size | 4/3" | |
Pixel Size | 4.5 x 4.5(μm) | |
Shutter | Global | |
SNR | >41dB | |
Dynamic Range | 59dB | |
Frame Rate | 9fps | |
Bit Depth | 10 | |
Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed , BayerGB8/10/10Packed , YUV422Packed, RGB8Packed |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | |
Binning | Support | |
Gain | x1~x6 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 1μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 128MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 76mmx76mmx46mm( not including lens mount and rear case connector) | |
Weigth | 450g | |
Power Supply | Support 12~24V DC wide range power supply | |
Power Consumption | 12V≈9W | |
Lens Mount | M58(FBL 12.3) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5A22MX050E | AX5A22CX050E | AX5A22MX060E | AX5A22CX060E | AX5A22MX340E | AX5A22CX340E |
Interface | CoaXPress- 6 | |||||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 12MP(4096x3072) | |||||
Image Sensor | CMOS / CMV12000 | |||||
Sensor Size | 1.8" | |||||
Pixel Size | 5.5 x 5.5(μm) | |||||
Shutter | Global | |||||
SNR | 41.3dB | |||||
Dynamic Range | 60dB | |||||
Frame Rate | 188fps | |||||
Bit Depth | 12 | |||||
Pixel Format | Mono8/10/12 | BayerBG8/10/12 | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 |
GPIO | 6-pin Hirose: 3*configurable input/output | |||||
Binning | ー | |||||
Gain | Gain 1 ~ 4, GainRaw(Digital Gain) 1 ~ 100 | |||||
Gamma | Range from 0 to 4, support LUT | |||||
Exposure Time | 50μs ~ 5s | |||||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | ー | |||||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 72mmx72mmx72mm ( not including lens mount and rear case connector) | 80mmx80mmx47mm ( not including lens mount and rear case connector) |
||||
Weigth | 390g | |||||
Power Supply | 24VDC power supply via Hirose, support PoCXP | |||||
Power Consumption | ≤15W | |||||
Lens Mount | M58 (FBL 12) | F | M42 | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A5B51MG4E | A5B51CG4E |
Interface | GigE | |
Mono/Color | Mono | Color |
Resolution | 25MP(5120 x 5120) | |
Image Sensor | CMOS / PYTHON 25K | |
Sensor Size | APS-H | |
Pixel Size | 4.5 x 4.5(μm) | |
Shutter | Global | |
SNR | 41dB | |
Dynamic Range | 59dB | |
Frame Rate | 4fps | |
Bit Depth | 10 | |
Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed , BayerGB8/10/10Packed , YUV422Packed, RGB8Packed |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | |
Binning | Support | |
Gain | x1~x6 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 1μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 128MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 76mmx76mmx46mm( not including lens mount and rear case connector) | |
Weigth | 450g | |
Power Supply | Support 12~24V DC wide range power supply | |
Power Consumption | 12V≈9W | |
Lens Mount | M58(FBL 12.3) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5B51MT250E | AX5B51CT250E |
Interface | 10GigE | |
Mono/Color | Mono | Color |
Resolution | 25MP(5120 x 5120) | |
Image Sensor | CMOS / PYTHON 25K | |
Sensor Size | 23.0x23.0(mm) | |
Pixel Size | 4.5 x 4.5(μm) | |
Shutter | Global | |
SNR | 41dB | |
Dynamic Range | 59dB | |
Frame Rate | 43fps | |
Bit Depth | 10 | |
Pixel Format | Mono8/10/10Packed | BayerRG8/10/10Packed , BayerGB8/10/10Packed |
GPIO | 12-pin Hirose connector includes external power supply, 3-opto isolated inputs and 3-opto isolated outputs | |
Binning | Support | |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 1μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 1GB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 72mmx72mmx78mm( not including lens mount and rear case connector) | |
Weigth | 583g | |
Power Supply | DC power supply by Hirose connector , with voltage range from 12V to 24V | |
Power Consumption | 24V≈21.6W | |
Lens Mount | M58(FBL 12.3) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5E02MX150E | AX5E02CX150E | AX5E02MX160E | AX5E02CX160E |
Interface | CoaXPress- 6 | |||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 47.5MP(7920x6004) | |||
Image Sensor | CMOS / CMV50000 | |||
Sensor Size | 35(mm) | |||
Pixel Size | 4.6 x 4.6(μm) | |||
Shutter | Global | |||
SNR | >41.6dB | |||
Dynamic Range | 64dB | |||
Frame Rate | 30fps | |||
Bit Depth | 12 | |||
Pixel Format | Mono8/10/10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , RGB8Packed | Mono8/10/10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , RGB8Packed |
GPIO | 6 pin Hirose: 3 configurable input/output without opto isolation | |||
Binning | - | |||
Gain | x1~x16 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | - | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 72mmx72mmx91mm ( not including lens mount and rear case connector) |
|||
Weigth | 390g | |||
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | |||
Power Consumption | 24V≈13W | |||
Lens Mount | M58 (FBL 12) | F | ||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5E07MG250E | AX5E07MK250E |
Interface | GigE | CameraLink |
Mono/Color | Mono | |
Resolution | 50MP(9344 x 5000) | 50MP(9280 x 5000) |
Image Sensor | CMOS / Customized | |
Sensor Size | 37.3(mm) | 33.9(mm) |
Pixel Size | 3.2 x 3.2(μm) | |
Shutter | Global | |
SNR | 40dB | >40dB |
Dynamic Range | 66dB | |
Frame Rate | 1fps | 17.57fps |
Bit Depth | 10 | |
Pixel Format | Mono8/10/10Packed | Mono8 |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output, 1 RS232 serial port |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 16μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 256MB | 512MB |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 72mmx72mmx64.1mm ( not including lens mount and rear case connector) | 72mmx72mmx65mm ( not including lens mount and rear case connector) |
Weigth | 450g | 490g |
Power Supply | Support 12~24V DC wide range power supply | |
Power Consumption | 12V≈9W | 24V≈6.83W |
Lens Mount | M58(FBL 12.3) | M58(FBL 12) |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5F57MG050E | AX5F57MK250E | AX5F57CK250E |
Interface | GigE | CameraLink | |
Mono/Color | Mono | Mono | Color |
Resolution | 65MP(9344 x 7000) | 65MP(9280 x 6992) | |
Image Sensor | CMOS / GMAX3265 | ||
Sensor Size | 37.3(mm) | 37.4mm(29.9mm x 22.4mm) | |
Pixel Size | 3.2 x 3.2(μm) | ||
Shutter | Global | ||
SNR | >41dB | 40dB | |
Dynamic Range | 59dB | 66dB | |
Frame Rate | 1fps | 12.6fps(85M,10TAP) | |
Bit Depth | 10 | ||
Pixel Format | Mono8/10/10Packed | Mono8 | BayerGB8, BayerRG8 |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output, 1 RS232 serial port |
|
Binning | Support | - | |
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 16μs~1s | 16μs~15s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 256MB | 512MB | |
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 72mmx72mmx64mm ( not including lens mount and rear case connector) | 72mmx72mmx65mm ( not including lens mount and rear case connector) |
|
Weigth | 450g | ≈490g | |
Power Supply | DC power supply by Hirose connector,with voltage range from 12V to 24V | ||
Power Consumption | 12V≈9.0W | 24V≈6.83W | |
Lens Mount | M58(FBL 12.3) | M58*0.75(FBL 12) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX7B96MG050/1E | AX7B96MG060/1E | AX7B96MK050/1E | AX7B96MK060/1E |
Interface | GigE | CameraLink | ||
Mono/Color | Mono | |||
Resolution | 29MP(6576 x 4384) | |||
Image Sensor | CCD / KAI29050 | |||
Sensor Size | 35(mm) | |||
Pixel Size | 5.5 x 5.5(μm) | |||
Shutter | Global | |||
SNR | >41dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 4fps | |||
Bit Depth | 14 | |||
Pixel Format | Mono8/10/10Packed | |||
GPIO | 12 pin Hirose: 3 configurable input/output without opto isolation; 1 RS232 serial port | |||
Binning | - | |||
Gain | x1~x16 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 30μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 336MB | - | ||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 72mmx72mmx53mm ( not including lens mount and rear case connector) | 72mmx72mmx54mm ( not including lens mount and rear case connector) |
||
Weigth | 390g | |||
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | |||
Power Consumption | 24V≈13W | 24V≈8W | ||
Lens Mount | F | M58 (FBL 12) | ||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX7C10MG250E | AX7C10CG250E | AX7C10MK250E |
Interface | GigE | CameraLink | |
Mono/Color | Mono | Color | Mono |
Resolution | 31MP(6480 x 4860) | ||
Image Sensor | CMOS / IMX342 | ||
Sensor Size | APS-C | ||
Pixel Size | 3.45 x 3.45(μm) | ||
Shutter | Global | ||
SNR | >38dB | ||
Dynamic Range | 66dB | ||
Frame Rate | 3fps | 20fps | |
Bit Depth | 12 | ||
Pixel Format | Mono8/10/10Packed/ 12/12Packed | BayerRG8/RG10/ RG10Packed | Mono8/10/10Packed/ 12/12Packed |
GPIO | 12 pin Hirose: 3 configurable input/output without opto isolation; 1 RS232 serial port | ||
Binning | Support | ||
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 3μs~10s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 256MB | - | |
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 72mmx72mmx64.1mm ( not including lens mount and rear case connector) | 72mmx72mmx64mm ( not including lens mount and rear case connector) |
|
Weigth | 350g | 390g | |
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | PoCL/ DC 14V~24V via Hirose connector | |
Power Consumption | 12V≤13W | 24V≈8W | |
Lens Mount | M58/F | M58 (FBL 12) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX7D36MG050/1E | AX7D36MG060E/1E |
Interface | GigE | |
Mono/Color | Mono | |
Resolution | 43MP(8040 x 5360) | |
Image Sensor | CCD / KAI43140 | |
Sensor Size | 35(mm) | |
Pixel Size | 4.5 x 4.5(μm) | |
Shutter | Global | |
SNR | >39dB | |
Dynamic Range | 59dB | |
Frame Rate | 2.6fps | |
Bit Depth | 14 | |
Pixel Format | Mono8/10/10Packed | |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output, 1 RS232 serial port |
|
Binning | - | |
Gain | x1~x6 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 30μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 415MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 72mmx72mmx53mm ( not including lens mount and rear case connector) |
|
Weigth | 390g | |
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | |
Power Consumption | 24V≈13W | |
Lens Mount | M58(FBL 12) | F |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX7Q00MK470E | AX7Q10MX470E |
Interface | CameraLink | CoaXPress- 6 |
Mono/Color | Mono | |
Resolution | 151MP(14160 x 10640) | |
Image Sensor | CMOS / IMX411 | |
Sensor Size | 53.4 × 40.0(mm) | |
Pixel Size | 3.76 x 3.76(μm) | |
Shutter | Rolling | |
SNR | 45dB | 45.5dB |
Dynamic Range | 90dB | 82.5dB |
Frame Rate | 5.09fps(80M,10TAP) | 6.2fps |
Bit Depth | 12 | |
Pixel Format | Mono8/10/12 | |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output |
|
Binning | - | |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 3μs~1s | 30μs~5s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 1GB | - |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 100mmx100mmx58mm ( not including lens mount and rear case connector) | 100mmx100mmx109.58mm |
Weigth | 890g | 650g |
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | 24VDC power supply via Hirose, support PoCXP |
Power Consumption | 24V≈18W | |
Lens Mount | M72 (FBL 12) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A9B57MX250E | A9B57CX250E |
Interface | CoaXPress- 6 | |
Mono/Color | Mono | Color |
Resolution | 25MP(5120x5120) | |
Image Sensor | CMOS / GMAX0505 | |
Sensor Size | 1.1" | |
Pixel Size | 2.5 x 2.5(μm) | |
Shutter | Global | |
SNR | 41.3dB | |
Dynamic Range | 60dB | |
Frame Rate | 90fps | |
Bit Depth | 12 | |
Pixel Format | Mono8/10/12 | BayerBG8/10/12 |
GPIO | 12-pin Hirose port:3 Opto-isolated inputs, 3 Opto-isolated outputs, 1 RS232 serial port | |
Binning | ー | |
Gain | Analog Gain 0.4 ~ 6.6, GainRaw(Digital Gain) 1 ~ 100 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 25μs ~ 5s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | ー | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 72mmx72mmx72mm ( not including lens mount and rear case connector) |
|
Weigth | 650g | |
Power Supply | 24VDC power supply via Hirose, support PoCXP | |
Power Consumption | 24V≤15W | |
Lens Mount | M58 | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A9B57MP050E | A9B57CP050E | A9B57MP340E | A9B57CP340E | A9B57MP350E | A9B57CP350E |
Interface | CoaXPress- 12 | |||||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 25MP(5120x5120) | |||||
Image Sensor | CMOS / GMAX0505 | |||||
Sensor Size | 1.1" | |||||
Pixel Size | 2.5 x 2.5(μm) | |||||
Shutter | Global | |||||
SNR | 41.3dB | |||||
Dynamic Range | 60dB | |||||
Frame Rate | 150fps | |||||
Bit Depth | 12 | |||||
Pixel Format | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 |
GPIO | 12-pin Hirose: 3*opto-isolated input/output, 1*RS232 serial port | |||||
Binning | ー | |||||
Gain | Analog Gain 0.4 ~ 6.6, GainRaw(Digital Gain) 1 ~ 100 | |||||
Gamma | Range from 0 to 4,support LUT | |||||
Exposure Time | 15μs ~ 5s | |||||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | ー | |||||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 80mmx80mmx72(not including lens mount and rear case connector) | 80mmx80mmx65(not including lens mount and rear case connector) | ||||
Weigth | 910g | 650g | ||||
Power Supply | DC 24V power supply over Hirose connector and support PoCXP |
|||||
Power Consumption | 24V≤15W | |||||
Lens Mount | M58(FBL12) | M42(FBL12) | M58(FBL12) | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | S5051MG000E | S5051MG001E |
Image Sensor | CMOS / Python500 | |
Resolution | 0.5MP(800 x 600) | |
Frame Rate | 60fps | |
Shutter | Global | |
Mono/Color | Mono | |
Sensor Size | 1/3.6" | |
Pixel Size | 4.8 x 4.8(μm) | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Bit Depth | 10 | |
Exposure Time | 16μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Processor | Movidius Myraid 2 VPU | |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory | |
SDK | SVStudio | |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
Power Supply | Support 8~26V DC wide range power supply | DC24V1.5A |
IP Rating | IP67 with lens cover | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |
Specification
Model | S5131MG000E | S5131MG001E |
Image Sensor | CMOS / Python1300 | |
Resolution | 1.3MP(1280 x 1022) | |
Frame Rate | 60fps | |
Shutter | Global | |
Mono/Color | Mono | |
Sensor Size | 1/2" | |
Pixel Size | 4.8 x 4.8(μm) | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Bit Depth | 10 | |
Exposure Time | 16μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Processor | Movidius Myraid 2 VPU | |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory | |
SDK | SVStudio | |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
Power Supply | Support 8~26V DC wide range power supply | DC24V1.5A |
IP Rating | IP67 with lens cover | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |
Specification
Model | S5201MG000E | S5201MG001E |
Image Sensor | CMOS / Python2000 | |
Resolution | 2MP(1920 x 1200) | |
Frame Rate | 45fps | |
Shutter | Global | |
Mono/Color | Mono | |
Sensor Size | 2/3" | |
Pixel Size | 4.8 x 4.8(μm) | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Bit Depth | 10 | |
Exposure Time | 4μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Processor | Movidius Myraid 2 VPU | |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory | |
SDK | SVStudio | |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
Power Supply | Support 8~26V DC wide range power supply | DC24V1.5A |
IP Rating | IP67 with lens cover | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |
Specification
Model | S5501MG000E | S5501MG001E |
Image Sensor | CMOS / Python5000 | |
Resolution | 5MP(2592 x 2048) | |
Frame Rate | 20fps | |
Shutter | Global | |
Mono/Color | Mono | |
Sensor Size | 1" | |
Pixel Size | 4.8 x 4.8(μm) | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Bit Depth | 10 | |
Exposure Time | 4μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Processor | Movidius Myraid 2 VPU | |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory | |
SDK | SVStudio | |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
Power Supply | Support 8~26V DC wide range power supply | DC24V1.5A |
IP Rating | IP67 with lens cover | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |
Specification
Model | S5051MG001E |
Near FOV | 1000mm |
Far FOV | 2000mm |
Working distance | 1000mm-1800mm |
Maximum scale | 1000mm x1000mm x2000mm(WxHxL) |
Laser type/grade | 3B |
Precision | 5mm x5mm x5mm |
Maximum conveyor speed | 2m/s |
Functions | Point cloud, volume measurement |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO for Power/IO/Encoder |
SDK | 3D Volume Measurement |
Dimensions | 370mm x65.6mm x150mm |
Weight | 2.9kg |
Power Supply | DC12/24V |
IP rating | IP65 |
Humidity | 5%-95%(no condensing) |
Temperature | Storage temperature: -30℃ ~ + 70℃; Opera temperature: 0℃ ~ +50℃ |
Specification
Model | S5600MG000E |
Image Sensor | CMOS / IMX178 |
Resolution | 6.2MP(3072 x 2048) |
Frame Rate | 15fps |
Shutter | Rolling |
Mono/Color | Mono |
Sensor Size | 1/1.8" |
Pixel Size | 2.4 x 2.4(μm) |
SNR | >38dB |
Dynamic Range | 66dB |
Bit Depth | 10 |
Exposure Time | 34μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode |
Processor | Movidius Myraid 2 VPU |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory |
SDK | SVStudio |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination |
Power Supply | Support 8~26V DC wide range power supply |
IP Rating | IP67 with lens cover |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |
Specification
Model | S5A20MG000E |
Image Sensor | CMOS / IMX226 |
Resolution | 12MP(4000 x 3000) |
Frame Rate | 10fps |
Shutter | Rolling |
Mono/Color | Mono |
Sensor Size | 1/1.7" |
Pixel Size | 1.85 x 1.85(μm) |
SNR | >38dB |
Dynamic Range | 66dB |
Bit Depth | 10 |
Exposure Time | 32μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode |
Processor | Movidius Myraid 2 VPU |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory |
SDK | SVStudio |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination |
Power Supply | Support 8~26V DC wide range power supply |
IP Rating | IP67 with lens cover |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |
Specification
Model | S5B00MG000E |
Image Sensor | CMOS / IMX183 |
Resolution | 20MP(5472 x 3600) |
Frame Rate | 10fps |
Shutter | Rolling |
Mono/Color | Mono |
Sensor Size | 1" |
Pixel Size | 2.4 x 2.4(μm) |
SNR | >38dB |
Dynamic Range | 66dB |
Bit Depth | 10 |
Exposure Time | 32μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode |
Processor | Movidius Myraid 2 VPU |
Interface | M12 8-pin Ethernet, M12 12-pin GPIO |
GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output |
Memory | 512MB RAM and 512MB non-volatile flash memory |
SDK | SVStudio |
Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) |
LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators |
Lens Mount | Support C-mount, M12 mount and optional built-in illumination |
Power Supply | Support 8~26V DC wide range power supply |
IP Rating | IP67 with lens cover |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃ |