A5201-2
A7040
A7300
A7500-1
A7500-2
A7A20-2
A7A21
AX5F57
AX7B96
AX7C10
Specification
Model | A5201MK402E | A5201CK402E |
Interface | CameraLink | |
Mono/Color | Mono | Color |
Resolution | 2.3MP (1920 x 1200) | |
Image Sensor | CMOS / PYTHON2000 | |
Sensor Size | 2/3" | |
Pixel Size | 4.8 x 4.8(μm) | |
Shutter | Global | |
SNR | >38dB | |
Dynamic Range | 60dB | |
Frame Rate | 37.8fps | |
Bit Depth | 10 | |
Image Format | Mono8/10 | BayerRG8/10 |
GPIO | CameraLink is used for camera control and data transmission | |
Binning | - | |
Gain | 0dB ~ 15.56dB | |
Gamma | - | |
Exposure Time | 16μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx43.8mm (not including lens mount and rear case connector) | |
Weigth | 80g | |
Power Supply | PoCL power supply | |
Power Consumption | 2.31W | 2.34W |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A7040MG000E | A7040CG000E | A7040MU000E | A7040CU000E | A7040MK402E | A7040CK402E |
Interface | GigE/PoE | USB3.0 | CameraLink | |||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 0.4MP(720x540) | |||||
Image Sensor | CMOS / IMX287 | |||||
Sensor Size | 1/2.9" | |||||
Pixel Size | 6.9 x 6.9(μm) | |||||
Shutter | Global | |||||
SNR | >38dB | |||||
Dynamic Range | 70dB | |||||
Frame Rate | 300fps | 439fps | 349fps | |||
Bit Depth | 12 | 10 | ||||
Pixel Format | Mono8/10/ 10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed/12/ 12Packed , BayerGB8/10/ 10Packed/12/ 12Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed, BayerGB8/10/ 10Packed | Mono8/10 | Mono8, BayerRG8/10 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base mode | ||||
Binning | Support | - | Support | - | ー | |
Gain | 0dB~48dB | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | |||||
Exposure Time | 20μs~1s | 16μs~1s | ||||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | 128MB | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) |
|||
Weigth | 88g | 60g | 80g | |||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL | |||
Power Consumption | 12V≈4W | ≈3.2W | ≈2.38W | |||
Lens Mount | C | |||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7300MG30E | A7300CG30E | A7300MU90E | A7300CU90E | A7300MK200E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 3.2MP(2048x1536) | ||||
Image Sensor | CMOS / IMX265 | CMOS / IMX252 | |||
Sensor Size | 1/1.8" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 36fps | 120fps | 188fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/ BayerGB8 | Mono8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base/medium/ Full/ Deca mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | - | Support | ー | ー |
Gain | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | ||||
Exposure Time | 32μs~1s | 20μs~1s | 1μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | 100g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL/ DC 6V~26V via Hirose connector | ||
Power Consumption | 12V≈3.0W | ≈3.91W | 12V≈3.04W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7500MU75E | A7500CU75E | A7500MK200E | A7500CK200E |
Interface | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 5MP(2448x2048) | |||
Image Sensor | CMOS / IMX250 | |||
Sensor Size | 2/3" | |||
Pixel Size | 3.45 x 3.45(μm) | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 70dB | |||
Frame Rate | 75fps | 160fps | ||
Bit Depth | 10 | 8 | ||
Pixel Format | Mono8/10/ 10Packed | BayerRG8, BayerGB8 | Mono8 | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base/medium/Full/Deca mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
||
Binning | Support | - | Support | - |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 21μs~1s | 8μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | - | ||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
||
Weigth | 60g | 100g | ||
Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | ||
Power Consumption | ≈4.2W | 12V≈3W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7500MG20E | A7500CG20E | A7500MU35E | A7500CU35E | A7500MK402E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 5MP(2448x2048) | ||||
Image Sensor | CMOS / IMX264 | ||||
Sensor Size | 2/3" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 20fps | 35fps | 37.2fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8, BayerGB8 | Mono8/10 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base mode | |||
Binning | Support | ー | Support | - | ー |
Gain | x1~x32 | 0dB~15.56dB | |||
Gamma | Range from 0 to 4, support LUT | ー | |||
Exposure Time | 34.23μs~1s | 28μs~1s | 16μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | 80g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL | ||
Power Consumption | 12V≈3.2W | ≈3.91W | ≈2.3W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7A20MG9E | A7A20CG9E | A7A20MU201E | A7A20CU201E | A7A20MK401E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 12.3MP(4096x3000) | ||||
Image Sensor | CMOS / IMX304 | ||||
Sensor Size | 1.1" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 9fps | 23.4fps | 20 | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/ 10/10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed | Mono8/10 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
Binning | Support | ー | Support | - | ー |
Gain | 0dB~48dB | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | ー | |||
Exposure Time | 48μs~1s | 29μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 128MB | 64MB | ー | ||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx44mmx58mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) |
|||
Weigth | 100g | 91g | 80g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL or DC power via Hirose, range from 6 ~24V | ||
Power Consumption | 12V≈3.2W | ≈4.0W | ≈2.4W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7A21MG400E | A7A21MK401E | A7A21MK200E |
Interface | GigE/PoE | CameraLink | |
Mono/Color | Mono | ||
Resolution | 12MP(4096x3072) | ||
Image Sensor | CMOS / XGS12000 | ||
Sensor Size | 1" | ||
Pixel Size | 3.2 x 3.2(μm) | ||
Shutter | Global | ||
SNR | >38dB | ||
Dynamic Range | 70dB | ||
Frame Rate | 9fps | 18fps | 56fps |
Bit Depth | 12 | 10 | |
Pixel Format | Mono8/10/10Packed | Mono8/10 | |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink for camera control and data transmission, support base/medium/Full/Deca work mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable IO |
|
Binning | Support | - | |
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | - | |
Exposure Time | 19μs~1s | 17μs~1s | 52μs~1s |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 64MB | - | |
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx43.8mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
Weigth | 88g | 80g | ≈100g |
Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V | Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 24V | |
Power Consumption | 12≈3.2W | 2.4W | ≈3W |
Lens Mount | C | ||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5F57MG050E | AX5F57MK250E | AX5F57CK250E |
Interface | GigE | CameraLink | |
Mono/Color | Mono | Mono | Color |
Resolution | 65MP(9344 x 7000) | 65MP(9280 x 6992) | |
Image Sensor | CMOS / GMAX3265 | ||
Sensor Size | 37.3(mm) | 37.4mm(29.9mm x 22.4mm) | |
Pixel Size | 3.2 x 3.2(μm) | ||
Shutter | Global | ||
SNR | >41dB | 40dB | |
Dynamic Range | 59dB | 66dB | |
Frame Rate | 1fps | 12.6fps(85M,10TAP) | |
Bit Depth | 10 | ||
Pixel Format | Mono8/10/10Packed | Mono8 | BayerGB8, BayerRG8 |
GPIO | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output | 12 pin Hirose: 3 Opto-isolated input, 3 Opto-isolated output, 1 RS232 serial port |
|
Binning | Support | - | |
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 16μs~1s | 16μs~15s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 256MB | 512MB | |
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 72mmx72mmx64mm ( not including lens mount and rear case connector) | 72mmx72mmx65mm ( not including lens mount and rear case connector) |
|
Weigth | 450g | ≈490g | |
Power Supply | DC power supply by Hirose connector,with voltage range from 12V to 24V | ||
Power Consumption | 12V≈9.0W | 24V≈6.83W | |
Lens Mount | M58(FBL 12.3) | M58*0.75(FBL 12) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX7B96MG050/1E | AX7B96MG060/1E | AX7B96MK050/1E | AX7B96MK060/1E |
Interface | GigE | CameraLink | ||
Mono/Color | Mono | |||
Resolution | 29MP(6576 x 4384) | |||
Image Sensor | CCD / KAI29050 | |||
Sensor Size | 35(mm) | |||
Pixel Size | 5.5 x 5.5(μm) | |||
Shutter | Global | |||
SNR | >41dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 4fps | |||
Bit Depth | 14 | |||
Pixel Format | Mono8/10/10Packed | |||
GPIO | 12 pin Hirose: 3 configurable input/output without opto isolation; 1 RS232 serial port | |||
Binning | - | |||
Gain | x1~x16 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 30μs~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 336MB | - | ||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 72mmx72mmx53mm ( not including lens mount and rear case connector) | 72mmx72mmx54mm ( not including lens mount and rear case connector) |
||
Weigth | 390g | |||
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | |||
Power Consumption | 24V≈13W | 24V≈8W | ||
Lens Mount | F | M58 (FBL 12) | ||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX7C10MG250E | AX7C10CG250E | AX7C10MK250E |
Interface | GigE | CameraLink | |
Mono/Color | Mono | Color | Mono |
Resolution | 31MP(6480 x 4860) | ||
Image Sensor | CMOS / IMX342 | ||
Sensor Size | APS-C | ||
Pixel Size | 3.45 x 3.45(μm) | ||
Shutter | Global | ||
SNR | >38dB | ||
Dynamic Range | 66dB | ||
Frame Rate | 3fps | 20fps | |
Bit Depth | 12 | ||
Pixel Format | Mono8/10/10Packed/ 12/12Packed | BayerRG8/RG10/ RG10Packed | Mono8/10/10Packed/ 12/12Packed |
GPIO | 12 pin Hirose: 3 configurable input/output without opto isolation; 1 RS232 serial port | ||
Binning | Support | ||
Gain | x1~x32 | ||
Gamma | Range from 0 to 4, support LUT | ||
Exposure Time | 3μs~10s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
Image Buffer | 256MB | - | |
User Setting | Support two sets of user-defined configurations | ||
Dimensions | 72mmx72mmx64.1mm ( not including lens mount and rear case connector) | 72mmx72mmx64mm ( not including lens mount and rear case connector) |
|
Weigth | 350g | 390g | |
Power Supply | DC power supply by Hirose connector , with voltage range from 14V to 24V | PoCL/ DC 14V~24V via Hirose connector | |
Power Consumption | 12V≤13W | 24V≈8W | |
Lens Mount | M58/F | M58 (FBL 12) | |
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |