A3051
A3200
Specification
| Model | A3051MG100E | A3051MG000E | A3051CG000E |
| Interface | GigE | GigE／P0E | |
| Mono/Color | Mono | Color | |
| Resolution | 0.5MP（800 ｘ ６００） | ||
| Image Sensor | CMOS / PYTHON 480 | ||
| Sensor Size | 1/3.6" | ||
| Pixel Size | 4.8 x 4.8（μm） | ||
| Shutter | Global | ||
| SNR | >38dB | ||
| Dynamic Range | 60dB | ||
| Frame Rate | 120fps | ||
| Bit Depth | 10 | ||
| Image Format | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed |
|
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||
| Binning | Support | - | |
| Gain | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | ||
| Exposure Time | 1μs～1s | ||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
| Image Buffer | 64MB | ||
| User Setting | Support two sets of user-defined configurations | ||
| Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | 29mmx29mmx42mm (not including lens mount and rear case connector) |
|
| Weigth | 60g | 88g | |
| Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | POE/DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈2.8W | ||
| Lens Mount | C | ||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | ||
Specification
| Model | A3200MG004E | A3200CG000E | A3200CU000E |
| Interface | GigE / PoE | USB3.0 | |
| Mono/Color | Mono | Color | |
| Resolution | 2.07MP（1920 x 1080） | ||
| Image Sensor | CMOS / IM290 | ||
| Sensor Size | 1/2.8" | ||
| Pixel Size | 2.9 x 2.9（μm） | ||
| Shutter | Rolling | ||
| SNR | >38dB | ||
| Dynamic Range | Support DOL-HDR | 66dB | |
| Frame Rate | 22 | 120 | |
| Bit Depth | 10 | 10 | |
| Image Format | Mono8 | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|
| Gain | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | ||
| Exposure Time | 17.5μs～1s | 8μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
| Image Buffer | 64MB | ||
| User Setting | Support two sets of user-defined configurations | ||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
|
| Weigth | 88g | 68g | |
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈3.3W | ≈2.8W | |
| Lens Mount | C | ||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | ||
