TECHNO HORIZON GROUP
テクノホライゾン公式Twitter
テクノホライゾン公式YouTube

株式会社タイテック ITANZI

A3124

Specification

ModelA3124MG100EA3124CG100E
InterfaceGigE
Mono/ColorMonoColor
Resolution1.2MP (1280 x 960)
Image SensorCMOS / AR0135
Sensor Size1/3"
Pixel Size3.75 x 3.75 um
ShutterGlobal
SNR40.7dB
Dynamic Range71.1dB
Frame Rate54 fps
Bit Depth12
Image FormatMono8/10/10Packed/12/12Packed"
Mono8,BayerRG8/10/10Packed/12/12Packed,
BayerGB8/10/10Packed/12/12Packed,
RGB8Packed,YUV422Packed
GPIO6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation
BinningSupport-
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time1μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx29mm
(not including lens mount and rear case connector)
Weigth69g
Power SupplyDC power supply by Hirose connector with voltage range from 6V to 26V
Power Consumption12V≈2.8W
Lens MountC
TemperatureStorage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃
A3131

Specification

ModelA3131MG100EA3131MG000EA3131CG000E
InterfaceGigEGigE/PoE
Mono/ColorMonoColor
Resolution1.3MP(1280 x 1024)
Image SensorCMOS / PYTHON 1300
Sensor Size1/2"
Pixel Size4.8 x 4.8(μm)
ShutterGlobal
SNR>38dB
Dynamic Range60dB
Frame Rate60fps
Bit Depth10
Image FormatMono8/10/10Packed Mono8, BayerRG8/10/10Packed,
BayerGB8/10/10Packed, YUV422Packed
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation
BinningSupport-
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time1μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx29mm
(not including lens mount and rear case connector)
29mmx29mmx42mm
(not including lens mount and rear case connector)
Weigth60g88g
Power SupplyDC power supply by Hirose connector
with voltage range from 6V to 26V
POE/DC power supply by Hirose connector with voltage range from 6V to 26V
Power Consumption12V≈2.8W
Lens MountC
TemperatureStorage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃
A3135

Specification

ModelA3135MG000EA3135CG000EA3135MU000EA3135CU000E
InterfaceGigE / PoEUSB3.0
Mono/ColorMonoColorMonoColor
Resolution1.2MP(1280 x 960)
Image SensorCCD / RJ33J4CA0DT
Sensor Size1/3"
Pixel Size3.75 x 3.75(μm)
ShutterGlobal
SNR>38dB
Dynamic Range63dB
Frame Rate30 fps33 fps
Bit Depth14
Image FormatMono8/10/10Packed Mono8, BayerRG8/10/10Packed,
BayerGB8/10/10Packed, YUV422Packed
Mono8/10/10PackedBayerRG8/10/10packed,
BayerRB8/10/10packed
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation
BinningSupport-Support-
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time1μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
(not including lens mount and rear case connector)
29mmx29mmx29mm
(not including lens mount and rear case connector)
Weigth88g68g
Power SupplyPOE/ DC power supply by Hirose connector with voltage range from 6V to 26Vvia USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V
Power Consumption12V≈3.2W2.4W
Lens MountC
TemperatureStorage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃
A3600

Specification

ModelA3600MG100EA3600MG18EA3600CG18EA3600MU60EA3600CU60E
InterfaceGigEGigE / PoEUSB3.0
Mono/ColorMonoColorMonoColor
Resolution6.2MP(3072 x 2048)
Image SensorCMOS / IMX178
Sensor Size1/1.8"
Pixel Size2.4 x 2.4(μm)
ShutterRolling
SNR>38dB
Dynamic Range66dB
Frame Rate18fps60fps
Bit Depth1210
Image FormatMono8/10/10Packed
/12/12Packed
Mono8/10/10PackedMono8,
BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed
Mono8/10/10PackedBayerRG8, BayerGB8
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation
BinningSupport-Support
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time25μs~1s8μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx29mm
(not including lens mount and rear case connector)
29mmx29mmx42mm
(not including lens mount and rear case connector)
29mmx29mmx29mm
(not including lens mount and rear case connector)
Weigth60g88g68g
Power SupplyDC power supply by Hirose connector,with voltage range from 6V to 26VPOE/ DC power supply by Hirose connector with voltage range from 6V to 26Vvia USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V
Power Consumption12V≈3.4W≈2.4W
Lens MountC
TemperatureStorage temperature: -30℃~+80℃, Operation temperature: -30℃~+50℃
A5201-1

Specification

ModelA5201MG50EA5201CG50EA5201MU150EA5201CU150E
InterfaceGigE / PoEUSB3.0
Mono/ColorMonoColorMonoColor
Resolution2.3MP (1920 x 1200)
Image SensorCMOS / PYTHON 2000
Sensor Size2/3"
Pixel Size4.8 x 4.8 um
ShutterGlobal
SNR>38dB
Dynamic Range60dB
Frame Rate50fps150fps
Bit Depth1010
Image FormatMono8/10/10PackedBayerGB8/10/10Packed, YUV422Packed
Mono8, BayerRG8/10/10Packed
Mono8/10/10PackedBayerRG8, BayerGB8
GPIO 6 pin Hirose:
1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation
BinningSupport--Support--
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time1μs ~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
( not including lens mount and rear case connector)
29mmx29mmx29mm
( not including lens mount and rear case connector)
Weigth88g60g
Power SupplyPOE/DC power supply by Hirose connector, with voltage range from 6V to 26V via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V
Power Consumption12V≈3.4W≈3.8W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃
A5201-2

Specification

ModelA5201MK402EA5201CK402E
InterfaceCameraLink
Mono/ColorMonoColor
Resolution2.3MP (1920 x 1200)
Image SensorCMOS / PYTHON2000
Sensor Size2/3"
Pixel Size4.8 x 4.8(μm)
ShutterGlobal
SNR>38dB
Dynamic Range60dB
Frame Rate37.8fps
Bit Depth10
Image FormatMono8/10BayerRG8/10
GPIOCameraLink is used for camera control and data transmission
Binning-
Gain0dB ~ 15.56dB
Gamma-
Exposure Time16μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx43.8mm (not including lens mount and rear case connector)
Weigth80g
Power SupplyPoCL power supply
Power Consumption2.31W2.34W
Lens MountC
TemperatureStorage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃
A5501

Specification

ModelA5501MG20EA5501CG20EA5501MU60EA5501CU60E
InterfaceGigE / PoEUSB3.0
Mono/ColorMonoColorMonoColor
Resolution5.3MP (2592 x 2048)
Image SensorCMOS / PYTHON 5000
Sensor Size1"
Pixel Size4.8 x 4.8 um
ShutterGlobal
SNR>38dB
Dynamic Range60dB
Frame Rate20fps60fps
Bit Depth1010
Image FormatMono8/10/10PackedBayerGB8/10/10Packed, YUV422Packed
Mono8, BayerRG8/10/10Packed
Mono8/10/10PackedBayerRG8, BayerGB8
GPIO 6 pin Hirose:
1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation
BinningSupport--Support--
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time1μs ~1s1μs ~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
( not including lens mount and rear case connector)
29mmx29mmx29mm
( not including lens mount and rear case connector)
Weigth88g60g
Power SupplyPOE/DC power supply by Hirose connector, with voltage range from 6V to 26V via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V
Power Consumption12V≈3.8W≈3.8W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃
A7200

Specification

ModelA7200MG30EA7200CG30EA7200MU001EA7200MU130EA7200CU130E
InterfaceGigE/PoEUSB3.0
Mono/ColorMonoColorMonoMonoColor
Resolution2.3MP(1920x1200)
Image SensorCMOS / IMX249CMOS / IMX174
Sensor Size1/1.2"
Pixel Size5.86 x 5.86(μm)
ShutterGlobal
SNR>38dB
Dynamic Range70dB
Frame Rate39fps38.7fps164fps
Bit Depth1210
Pixel FormatMono8/10/
10Packed/
12/12Packed
Mono8, BayerRG8/10/
10Packed ,
BayerGB8/10/
10Packed , YUV422Packed
Mono8/10/
10Packed
Mono8/10/
10Packed
BayerRG8/
BayerGB8
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation
BinningSupport-SupportSupport-
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time26μs~1s16μs~1s20μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
( not including lens mount and rear case connector)
29mmx29mmx29mm
( not including lens mount and rear case connector)
Weigth88g60g
Power SupplyPOE/DC power supply by Hirose connector,
with voltage range from 6V to 26V
Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V
Power Consumption12V≈2.8W≈3.0W≈3.91W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃
A7300

Specification

ModelA7300MG30EA7300CG30EA7300MU90EA7300CU90EA7300MK200E
InterfaceGigE/PoEUSB3.0CameraLink
Mono/ColorMonoColorMonoColorMono
Resolution3.2MP(2048x1536)
Image SensorCMOS / IMX265CMOS / IMX252
Sensor Size1/1.8"
Pixel Size3.45 x 3.45(μm)
ShutterGlobal
SNR>38dB
Dynamic Range70dB
Frame Rate36fps120fps188fps
Bit Depth1210
Pixel FormatMono8/10/
10Packed
Mono8, BayerRG8/10/
10Packed ,
BayerGB8/10/
10Packed , YUV422Packed
Mono8/10/
10Packed
BayerRG8/
BayerGB8
Mono8
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation CameraLink interface: camera control and image transmission; support base/medium/ Full/ Deca mode

6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation
BinningSupport-Support
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time32μs~1s20μs~1s1μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
( not including lens mount and rear case connector)
29mmx29mmx29mm
( not including lens mount and rear case connector)
29mmx44mmx58mm
( not including lens mount and rear case connector)
Weigth88g60g100g
Power SupplyPOE/DC power supply by Hirose connector,
with voltage range from 6V to 26V
Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26VPoCL/ DC 6V~26V via Hirose connector
Power Consumption12V≈3.0W≈3.91W12V≈3.04W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃
A7500-2

Specification

ModelA7500MG20EA7500CG20EA7500MU35EA7500CU35EA7500MK402E
InterfaceGigE/PoEUSB3.0CameraLink
Mono/ColorMonoColorMonoColorMono
Resolution5MP(2448x2048)
Image SensorCMOS / IMX264
Sensor Size2/3"
Pixel Size3.45 x 3.45(μm)
ShutterGlobal
SNR>38dB
Dynamic Range70dB
Frame Rate20fps35fps37.2fps
Bit Depth1210
Pixel FormatMono8/10/
10Packed
Mono8, BayerRG8/10/
10Packed ,
BayerGB8/10/
10Packed , YUV422Packed
Mono8/10/
10Packed
BayerRG8,
BayerGB8
Mono8/10
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation CameraLink interface: camera control and image transmission; support base mode
BinningSupportSupport-
Gainx1~x320dB~15.56dB
GammaRange from 0 to 4, support LUT
Exposure Time34.23μs~1s28μs~1s16μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
( not including lens mount and rear case connector)
29mmx29mmx29mm
( not including lens mount and rear case connector)
29mmx29mmx43.8mm
( not including lens mount and rear case connector)
Weigth88g60g80g
Power SupplyPOE/DC power supply by Hirose connector, with voltage range from 6V to 26VPower supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26VPoCL
Power Consumption12V≈3.2W≈3.91W≈2.3W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃
A7900

Specification

ModelA7900MU200EA7900CU200EA7900MG13EA7900CG13EA7900MU201EA7900CU201E
InterfaceUSB3.0GigE/PoEUSB3.0
Mono/ColorMonoColorMonoColorMonoColor
Resolution8.8MP(4096x2160)
Image SensorCMOS / IMX255CMOS / IMX267
Sensor Size1"
Pixel Size3.45 x 3.45(μm)
ShutterGlobal
SNR>38dB
Dynamic Range70dB
Frame Rate40fps13fps32fps
Bit Depth1012
Pixel FormatMono8/10/
10Packed
BayerRG8/10/
10Packed,
BayerGB8/10/
10Packed
Mono8/10/
10Packed
BayerRG8/10/
10Packed,
BayerGB8/10/
10Packed
Mono8/10/
10Packed
BayerRG8/10/
10Packed,
BayerGB8/10/
10Packed
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation
BinningSupport-Support-Support
Gainx1~x320dB~48dBx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time26μs~1s1μs~1s29μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB128MB64MB
User SettingSupport two sets of user-defined configurations
Dimensions29mmx44mmx58mm
( not including lens mount and rear case connector)
Weigth91g100g91g
Power SupplyPower supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26VPOE/DC power supply by Hirose connector,
with voltage range from 6V to 26V
Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V
Power Consumption≈4.0W12V≈3.2W≈4.0W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃
A7A21

Specification

ModelA7A21MG400EA7A21MK401EA7A21MK200E
InterfaceGigE/PoECameraLink
Mono/ColorMono
Resolution12MP(4096x3072)
Image SensorCMOS / XGS12000
Sensor Size1"
Pixel Size3.2 x 3.2(μm)
ShutterGlobal
SNR>38dB
Dynamic Range70dB
Frame Rate9fps18fps56fps
Bit Depth1210
Pixel FormatMono8/10/10PackedMono8/10
GPIO 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation CameraLink for camera control and data transmission, support base/medium/Full/Deca work mode
6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable IO
BinningSupport-
Gainx1~x32
GammaRange from 0 to 4, support LUT -
Exposure Time19μs~1s17μs~1s52μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer64MB-
User SettingSupport two sets of user-defined configurations
Dimensions29mmx29mmx42mm
( not including lens mount and rear case connector)
29mmx29mmx43.8mm
( not including lens mount and rear case connector)
29mmx44mmx58mm
( not including lens mount and rear case connector)
Weigth88g80g≈100g
Power SupplyPOE/DC power supply by Hirose connector,with voltage range from 6V to 26V Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 24V
Power Consumption12≈3.2W2.4W≈3W
Lens MountC
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃
AX5B51

Specification

ModelAX5B51MT250EAX5B51CT250E
Interface10GigE
Mono/ColorMonoColor
Resolution25MP(5120 x 5120)
Image SensorCMOS / PYTHON 25K
Sensor Size23.0x23.0(mm)
Pixel Size4.5 x 4.5(μm)
ShutterGlobal
SNR41dB
Dynamic Range59dB
Frame Rate43fps
Bit Depth10
Pixel FormatMono8/10/10PackedBayerRG8/10/10Packed ,
BayerGB8/10/10Packed
GPIO12-pin Hirose connector includes external power supply, 3-opto isolated inputs and 3-opto isolated outputs
BinningSupport
Gainx1~x32
GammaRange from 0 to 4, support LUT
Exposure Time1μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
Image Buffer1GB
User SettingSupport two sets of user-defined configurations
Dimensions72mmx72mmx78mm( not including lens mount and rear case connector)
Weigth583g
Power SupplyDC power supply by Hirose connector , with voltage range from 12V to 24V
Power Consumption24V≈21.6W
Lens MountM58(FBL 12.3)
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃
S5051

Specification

ModelS5051MG000ES5051MG001E
Image SensorCMOS / Python500
Resolution0.5MP(800 x 600)
Frame Rate60fps
ShutterGlobal
Mono/ColorMono
Sensor Size1/3.6"
Pixel Size4.8 x 4.8(μm)
SNR>38dB
Dynamic Range60dB
Bit Depth10
Exposure Time16μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
ProcessorMovidius Myraid 2 VPU
InterfaceM12 8-pin Ethernet, M12 12-pin GPIO
GPIO12 pins I/O connector: RS232/485(optional),
Opto-isolated: 3ch input, 3ch output
12 pins I/O connector: RS232/485(optional),
Opto-isolated: 2ch input, 3ch output
Memory512MB RAM and 512MB non-volatile flash memory
SDKSVStudio
Dimensions68mm x 55mm x 28mm
( not including lens mount and height of connectors)
81.5mm x 72mm x 96mm
( may different with different lens)
LED indicator5 LED indicators: system, network, trigger and 2 configurable indicators
Lens MountSupport C-mount, M12 mount
and optional built-in illumination
C-mount, built-in light
Power SupplySupport 8~26V DC wide range power supplyDC24V1.5A
IP RatingIP67 with lens cover
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃
S5131

Specification

ModelS5131MG000ES5131MG001E
Image SensorCMOS / Python1300
Resolution1.3MP(1280 x 1022)
Frame Rate60fps
ShutterGlobal
Mono/ColorMono
Sensor Size1/2"
Pixel Size4.8 x 4.8(μm)
SNR>38dB
Dynamic Range60dB
Bit Depth10
Exposure Time16μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
ProcessorMovidius Myraid 2 VPU
InterfaceM12 8-pin Ethernet, M12 12-pin GPIO
GPIO12 pins I/O connector: RS232/485(optional),
Opto-isolated: 3ch input, 3ch output
12 pins I/O connector: RS232/485(optional),
Opto-isolated: 2ch input, 3ch output
Memory512MB RAM and 512MB non-volatile flash memory
SDKSVStudio
Dimensions68mm x 55mm x 28mm
( not including lens mount and height of connectors)
81.5mm x 72mm x 96mm
( may different with different lens)
LED indicator5 LED indicators: system, network, trigger and 2 configurable indicators
Lens MountSupport C-mount, M12 mount
and optional built-in illumination
C-mount, built-in light
Power SupplySupport 8~26V DC wide range power supplyDC24V1.5A
IP RatingIP67 with lens cover
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃
S5201

Specification

ModelS5201MG000ES5201MG001E
Image SensorCMOS / Python2000
Resolution2MP(1920 x 1200)
Frame Rate45fps
ShutterGlobal
Mono/ColorMono
Sensor Size2/3"
Pixel Size4.8 x 4.8(μm)
SNR>38dB
Dynamic Range60dB
Bit Depth10
Exposure Time4μs~1s
Trigger ModeSoftware trigger/Hardware trigger/Free run mode
ProcessorMovidius Myraid 2 VPU
InterfaceM12 8-pin Ethernet, M12 12-pin GPIO
GPIO12 pins I/O connector: RS232/485(optional),
Opto-isolated: 3ch input, 3ch output
12 pins I/O connector: RS232/485(optional),
Opto-isolated: 2ch input, 3ch output
Memory512MB RAM and 512MB non-volatile flash memory
SDKSVStudio
Dimensions68mm x 55mm x 28mm
( not including lens mount and height of connectors)
81.5mm x 72mm x 96mm
( may different with different lens)
LED indicator5 LED indicators: system, network, trigger and 2 configurable indicators
Lens MountSupport C-mount, M12 mount
and optional built-in illumination
C-mount, built-in light
Power SupplySupport 8~26V DC wide range power supplyDC24V1.5A
IP RatingIP67 with lens cover
TemperatureStorage temperature: -30℃ ~ + 80℃; Opera temperature: -20℃ ~ +50℃
D5201MG100E

Specification

ModelS5051MG001E
Near FOV1000mm
Far FOV2000mm
Working distance1000mm-1800mm
Maximum scale1000mm x1000mm x2000mm(WxHxL)
Laser type/grade3B
Precision5mm x5mm x5mm
Maximum conveyor speed2m/s
FunctionsPoint cloud, volume measurement
InterfaceM12 8-pin Ethernet, M12 12-pin GPIO for Power/IO/Encoder
SDK3D Volume Measurement
Dimensions370mm x65.6mm x150mm
Weight2.9kg
Power SupplyDC12/24V
IP ratingIP65
Humidity5%-95%(no condensing)
TemperatureStorage temperature: -30℃ ~ + 70℃; Opera temperature: 0℃ ~ +50℃