A3200
A3504
A3600
A3A20
A3B00
S5501
Specification
| Model | A3200MG004E | A3200CG000E | A3200CU000E |
| Interface | GigE / PoE | USB3.0 | |
| Mono/Color | Mono | Color | |
| Resolution | 2.07MP（1920 x 1080） | ||
| Image Sensor | CMOS / IM290 | ||
| Sensor Size | 1/2.8" | ||
| Pixel Size | 2.9 x 2.9（μm） | ||
| Shutter | Rolling | ||
| SNR | >38dB | ||
| Dynamic Range | Support DOL-HDR | 66dB | |
| Frame Rate | 22 | 120 | |
| Bit Depth | 10 | 10 | |
| Image Format | Mono8 | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|
| Gain | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | ||
| Exposure Time | 17.5μs～1s | 8μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||
| Image Buffer | 64MB | ||
| User Setting | Support two sets of user-defined configurations | ||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
|
| Weigth | 88g | 68g | |
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈3.3W | ≈2.8W | |
| Lens Mount | C | ||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | ||
Specification
| Model | A3504MG100E | A3504CG100E |
| Interface | GigE | |
| Mono/Color | Mono | Color |
| Resolution | 5.0MP (2592 x 1944) | |
| Image Sensor | CMOS / AR0521 | |
| Sensor Size | 1/2.5" | |
| Pixel Size | 2.2 x 2.2 um | |
| Shutter | Rolling | |
| SNR | >38dB | |
| Dynamic Range | 60dB | |
| Frame Rate | 23 fps | |
| Bit Depth | 12 | |
| Image Format | Mono8/10/10Packed/12/12Packed | Mono8,BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
| Binning | Support | - |
| Gain | x1～x32 | |
| Gamma | Range from 0 to 4, support LUT | |
| Exposure Time | 21.5μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Image Buffer | 64MB | |
| User Setting | Support two sets of user-defined configurations | |
| Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | |
| Weigth | 69g | |
| Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
| Power Consumption | 12V≈2.8W | |
| Lens Mount | C | |
| Temperature | Storage temperature: -30℃～+ 80℃, Operation temperature: -30℃～+ 50℃ | |
Specification
| Model | A3600MG100E | A3600MG18E | A3600CG18E | A3600MU60E | A3600CU60E |
| Interface | GigE | GigE / PoE | USB3.0 | ||
| Mono/Color | Mono | Color | Mono | Color | |
| Resolution | 6.2MP（3072 x 2048） | ||||
| Image Sensor | CMOS / IMX178 | ||||
| Sensor Size | 1/1.8" | ||||
| Pixel Size | 2.4 x 2.4（μm） | ||||
| Shutter | Rolling | ||||
| SNR | >38dB | ||||
| Dynamic Range | 66dB | ||||
| Frame Rate | 18fps | 60fps | |||
| Bit Depth | 12 | 10 | |||
| Image Format | Mono8/10/10Packed /12/12Packed | Mono8/10/10Packed | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
| Binning | Support | - | Support | ||
| Gain | x1～x32 | ||||
| Gamma | Range from 0 to 4, support LUT | ||||
| Exposure Time | 25μs～1s | 8μs～1s | |||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
| Image Buffer | 64MB | ||||
| User Setting | Support two sets of user-defined configurations | ||||
| Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
| Weigth | 60g | 88g | 68g | ||
| Power Supply | DC power supply by Hirose connector,with voltage range from 6V to 26V | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
| Power Consumption | 12V≈3.4W | ≈2.4W | |||
| Lens Mount | C | ||||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | ||||
Specification
| Model | A3A20MG8E | A3A20CG8E | A3A20MU24E | A3A20CU24E |
| Interface | GigE / PoE | USB3.0 | ||
| Mono/Color | Mono | Color | Mono | Color |
| Resolution | 12MP（4000x3000） | |||
| Image Sensor | CMOS/ IMX226 | |||
| Sensor Size | 1/1.7" | |||
| Pixel Size | 1.85x1.85（μm） | |||
| Shutter | Rolling | |||
| SNR | >38dB | |||
| Dynamic Range | 66dB | |||
| Frame Rate | 9 fps | 24 fps | ||
| Bit Depth | 12 | 10 | ||
| Image Format | Mono8/10/10Packed /12/12Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
| Binning | Support | - | Support | - |
| Gain | x1～x32 | |||
| Gamma | Range from 0 to 4, support LUT | |||
| Exposure Time | 143μs～15s | 55μs～15s | ||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
| Image Buffer | 64MB | |||
| User Setting | Support two sets of user-defined configurations | |||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
| Weigth | 88g | 68g | ||
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
| Power Consumption | 12V≈3.4W | 2.4W | ||
| Lens Mount | C | |||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | |||
Specification
| Model | A3B00MG000E | A3B00CG000E | A3B00MU000E | A3B00CU000E |
| Interface | GigE / PoE | USB3.0 | ||
| Mono/Color | Mono | Color | Mono | Color |
| Resolution | 20MP（5472x3648） | |||
| Image Sensor | CMOS/ IMX183 | |||
| Sensor Size | 1" | |||
| Pixel Size | 2.4x2.4 （μm） | |||
| Shutter | Rolling | |||
| SNR | >38dB | |||
| Dynamic Range | 66dB | |||
| Frame Rate | 5.8fps | 19.66 fps | ||
| Bit Depth | 10 | |||
| Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8/10/10Packed, BayerGB8/10/10Packed |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |||
| Binning | Support | - | Support | - |
| Gain | 0dB～27dB | x1～x32 | ||
| Gamma | Range from 0 to 4, support LUT | |||
| Exposure Time | 184μs～1s | 53μs～1s | ||
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
| Image Buffer | 256MB on-board buffer | 128MB | ||
| User Setting | Support two sets of user-defined configurations | |||
| Dimensions | 29mmx29mmx42mm (not including lens mount and rear case connector) | 29mmx29mmx29mm (not including lens mount and rear case connector) |
||
| Weigth | 88g | 68g | ||
| Power Supply | POE/ DC power supply by Hirose connector with voltage range from 6V to 26V | via USB connector/DC power supply by Hirose connector with voltage range from 6V to 26V | ||
| Power Consumption | 12V≈3.4W | ≈3.2W | ||
| Lens Mount | C | |||
| Temperature | Storage temperature: -30℃～+80℃, Operation temperature: -30℃～+50℃ | |||
Specification
| Model | S5501MG000E | S5501MG001E |
| Image Sensor | CMOS / Python5000 | |
| Resolution | 5MP（2592 ｘ 2048） | |
| Frame Rate | 20fps | |
| Shutter | Global | |
| Mono/Color | Mono | |
| Sensor Size | 1" | |
| Pixel Size | 4.8 x 4.8（μm） | |
| SNR | >38dB | |
| Dynamic Range | 60dB | |
| Bit Depth | 10 | |
| Exposure Time | 4μs～1s | |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
| Processor | Movidius Myraid 2 VPU | |
| Interface | M12 8-pin Ethernet, M12 12-pin GPIO | |
| GPIO | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 3ch input, 3ch output | 12 pins I/O connector: RS232/485(optional), Opto-isolated: 2ch input, 3ch output |
| Memory | 512MB RAM and 512MB non-volatile flash memory | |
| SDK | SVStudio | |
| Dimensions | 68mm x 55mm x 28mm ( not including lens mount and height of connectors) | 81.5mm x 72mm x 96mm ( may different with different lens) |
| LED indicator | 5 LED indicators: system, network, trigger and 2 configurable indicators | |
| Lens Mount | Support C-mount, M12 mount and optional built-in illumination | C-mount, built-in light |
| Power Supply | Support 8～26V DC wide range power supply | DC24V1.5A |
| IP Rating | IP67 with lens cover | |
| Temperature | Storage temperature: -30℃ ～ + 80℃; Opera temperature: -20℃ ～ +50℃ | |
