A3138
A5051
A5131
A5201-1
A7200
A7300
A7500-1
AX5A22
A9B57-2
Specification
Model | A3138MU000E | A3138CU000E |
Interface | USB3.0 | |
Mono/Color | Mono | Color |
Resolution | 1.3MP (1280x1024) | |
Image Sensor | CMOS / SC130GS | |
Sensor Size | 1/2.7" | |
Pixel Size | 4.0 x 4.0(μm) | |
Shutter | Global | |
SNR | 40dB | |
Dynamic Range | 60dB | |
Frame Rate | 201fps | |
Bit Depth | 10 | |
Image Format | Mono8/10/10Packed | BayerRG8/10/10Packed, BayerGB8/10/10Packed |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | |
Binning | Support | - |
Gain | x1~x32 | |
Gamma | Range from 0 to 4, support LUT | |
Exposure Time | 10μs~1s | |
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |
Image Buffer | 64MB | |
User Setting | Support two sets of user-defined configurations | |
Dimensions | 29mmx29mmx29mm (not including lens mount and rear case connector) | |
Weigth | 68g | |
Power Supply | DC power supply by Hirose connector with voltage range from 6V to 26V | |
Power Consumption | 2.8W | |
Lens Mount | C | |
Temperature | Storage temperature: -30℃~+ 80℃, Operation temperature: -30℃~+ 50℃ |
Specification
Model | A5051MG200E | A5051CG200E | A5051MU545U | A5051CU545U |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 0.5MP (800 x 600) | |||
Image Sensor | CMOS / Python500 | |||
Sensor Size | 1/3.6" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 200fps | 545fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.3W | ≈3.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5131MG75E | A5131CG75E | A5131MU210E | A5131CU210E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 1.3MP (1280 x 1024) | |||
Image Sensor | CMOS / PYTHON 1300 | |||
Sensor Size | 1/2" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 75fps | 210fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
ROI | Support | |||
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | ≈3.4W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A5201MG50E | A5201CG50E | A5201MU150E | A5201CU150E |
Interface | GigE / PoE | USB3.0 | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 2.3MP (1920 x 1200) | |||
Image Sensor | CMOS / PYTHON 2000 | |||
Sensor Size | 2/3" | |||
Pixel Size | 4.8 x 4.8 um | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 60dB | |||
Frame Rate | 50fps | 150fps | ||
Bit Depth | 10 | 10 | ||
Image Format | Mono8/10/10Packed | BayerGB8/10/10Packed, YUV422Packed Mono8, BayerRG8/10/10Packed | Mono8/10/10Packed | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | -- | Support | -- |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 1μs ~1s | |||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | |||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | ||
Power Consumption | 12V≈3.4W | ≈3.8W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Operation temperature: -30℃ ~+50℃ |
Specification
Model | A7200MG30E | A7200CG30E | A7200MU001E | A7200MU130E | A7200CU130E |
Interface | GigE/PoE | USB3.0 | |||
Mono/Color | Mono | Color | Mono | Mono | Color |
Resolution | 2.3MP(1920x1200) | ||||
Image Sensor | CMOS / IMX249 | CMOS / IMX174 | |||
Sensor Size | 1/1.2" | ||||
Pixel Size | 5.86 x 5.86(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 39fps | 38.7fps | 164fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed/ 12/12Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | Mono8/10/ 10Packed | BayerRG8/ BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | ||||
Binning | Support | - | Support | Support | - |
Gain | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | ||||
Exposure Time | 26μs~1s | 16μs~1s | 20μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ||||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) |
|||
Weigth | 88g | 60g | |||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | |||
Power Consumption | 12V≈2.8W | ≈3.0W | ≈3.91W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7300MG30E | A7300CG30E | A7300MU90E | A7300CU90E | A7300MK200E |
Interface | GigE/PoE | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color | Mono |
Resolution | 3.2MP(2048x1536) | ||||
Image Sensor | CMOS / IMX265 | CMOS / IMX252 | |||
Sensor Size | 1/1.8" | ||||
Pixel Size | 3.45 x 3.45(μm) | ||||
Shutter | Global | ||||
SNR | >38dB | ||||
Dynamic Range | 70dB | ||||
Frame Rate | 36fps | 120fps | 188fps | ||
Bit Depth | 12 | 10 | |||
Pixel Format | Mono8/10/ 10Packed | Mono8, BayerRG8/10/ 10Packed , BayerGB8/10/ 10Packed , YUV422Packed | Mono8/10/ 10Packed | BayerRG8/ BayerGB8 | Mono8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base/medium/ Full/ Deca mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
|||
Binning | Support | - | Support | ー | ー |
Gain | x1~x32 | ||||
Gamma | Range from 0 to 4, support LUT | ||||
Exposure Time | 32μs~1s | 20μs~1s | 1μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | ||||
Image Buffer | 64MB | ー | |||
User Setting | Support two sets of user-defined configurations | ||||
Dimensions | 29mmx29mmx42mm ( not including lens mount and rear case connector) | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
||
Weigth | 88g | 60g | 100g | ||
Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via USB connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | PoCL/ DC 6V~26V via Hirose connector | ||
Power Consumption | 12V≈3.0W | ≈3.91W | 12V≈3.04W | ||
Lens Mount | C | ||||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A7500MU75E | A7500CU75E | A7500MK200E | A7500CK200E |
Interface | USB3.0 | CameraLink | ||
Mono/Color | Mono | Color | Mono | Color |
Resolution | 5MP(2448x2048) | |||
Image Sensor | CMOS / IMX250 | |||
Sensor Size | 2/3" | |||
Pixel Size | 3.45 x 3.45(μm) | |||
Shutter | Global | |||
SNR | >38dB | |||
Dynamic Range | 70dB | |||
Frame Rate | 75fps | 160fps | ||
Bit Depth | 10 | 8 | ||
Pixel Format | Mono8/10/ 10Packed | BayerRG8, BayerGB8 | Mono8 | BayerRG8, BayerGB8 |
GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation | CameraLink interface: camera control and image transmission; support base/medium/Full/Deca mode 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
||
Binning | Support | - | Support | - |
Gain | x1~x32 | |||
Gamma | Range from 0 to 4, support LUT | |||
Exposure Time | 21μs~1s | 8μs~1s | ||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||
Image Buffer | 64MB | - | ||
User Setting | Support two sets of user-defined configurations | |||
Dimensions | 29mmx29mmx29mm ( not including lens mount and rear case connector) | 29mmx44mmx58mm ( not including lens mount and rear case connector) |
||
Weigth | 60g | 100g | ||
Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 6V to 26V | Power supply via CameraLink connector /DC power supply by Hirose connector,with voltage range from 6V to 26V | ||
Power Consumption | ≈4.2W | 12V≈3W | ||
Lens Mount | C | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | AX5A22MX050E | AX5A22CX050E | AX5A22MX060E | AX5A22CX060E | AX5A22MX340E | AX5A22CX340E |
Interface | CoaXPress- 6 | |||||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 12MP(4096x3072) | |||||
Image Sensor | CMOS / CMV12000 | |||||
Sensor Size | 1.8" | |||||
Pixel Size | 5.5 x 5.5(μm) | |||||
Shutter | Global | |||||
SNR | 41.3dB | |||||
Dynamic Range | 60dB | |||||
Frame Rate | 188fps | |||||
Bit Depth | 12 | |||||
Pixel Format | Mono8/10/12 | BayerBG8/10/12 | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 |
GPIO | 6-pin Hirose: 3*configurable input/output | |||||
Binning | ー | |||||
Gain | Gain 1 ~ 4, GainRaw(Digital Gain) 1 ~ 100 | |||||
Gamma | Range from 0 to 4, support LUT | |||||
Exposure Time | 50μs ~ 5s | |||||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | ー | |||||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 72mmx72mmx72mm ( not including lens mount and rear case connector) | 80mmx80mmx47mm ( not including lens mount and rear case connector) |
||||
Weigth | 390g | |||||
Power Supply | 24VDC power supply via Hirose, support PoCXP | |||||
Power Consumption | ≤15W | |||||
Lens Mount | M58 (FBL 12) | F | M42 | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |
Specification
Model | A9B57MP050E | A9B57CP050E | A9B57MP340E | A9B57CP340E | A9B57MP350E | A9B57CP350E |
Interface | CoaXPress- 12 | |||||
Mono/Color | Mono | Color | Mono | Color | Mono | Color |
Resolution | 25MP(5120x5120) | |||||
Image Sensor | CMOS / GMAX0505 | |||||
Sensor Size | 1.1" | |||||
Pixel Size | 2.5 x 2.5(μm) | |||||
Shutter | Global | |||||
SNR | 41.3dB | |||||
Dynamic Range | 60dB | |||||
Frame Rate | 150fps | |||||
Bit Depth | 12 | |||||
Pixel Format | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 | Mono8/10/12 | BayerGB8/10/12 |
GPIO | 12-pin Hirose: 3*opto-isolated input/output, 1*RS232 serial port | |||||
Binning | ー | |||||
Gain | Analog Gain 0.4 ~ 6.6, GainRaw(Digital Gain) 1 ~ 100 | |||||
Gamma | Range from 0 to 4,support LUT | |||||
Exposure Time | 15μs ~ 5s | |||||
Trigger Mode | Software trigger/Hardware trigger/Free run mode | |||||
Image Buffer | ー | |||||
User Setting | Support two sets of user-defined configurations | |||||
Dimensions | 80mmx80mmx72(not including lens mount and rear case connector) | 80mmx80mmx65(not including lens mount and rear case connector) | ||||
Weigth | 910g | 650g | ||||
Power Supply | DC 24V power supply over Hirose connector and support PoCXP |
|||||
Power Consumption | 24V≤15W | |||||
Lens Mount | M58(FBL12) | M42(FBL12) | M58(FBL12) | |||
Temperature | Storage temperature: -30℃ ~ + 80℃; Opera temperature: -30℃ ~ +50℃ |